Powered by NetworkEleven ImageMagick logo

Magick Image File Format (MIFF) is a platform-independent format for storing bitmap images. MIFF is a part of the ImageMagick toolkit of image manipulation utilities. ImageMagick is capable of converting many different image file formats to and from MIFF (e.g. JPEG, XPM, TIFF, etc.).

> Description

A MIFF image file consist of two sections. The first section is a header composed of keywords describing the image in text form. The next section is the binary image data. The header is separated from the image data by a : character immediately followed by a ctrl-Z.

The MIFF header is composed entirely of LATIN-1 characters. The fields in the header are keyword and value combination in the keyword=value format, with each keyword and value separated by an equal sign (=). Each keyword=value combination is delimited by at least one control or whitespace character. Comments may appear in the header section and are always delimited by braces. The MIFF header always ends with a colon (:) character, followed by a ctrl-Z character. It is also common to precede the colon with a formfeed and a newline character. The formfeed prevents the listing of binary data when using more(1) under Unix where the ctrl-Z has the same effect with the type command on the Win32 command line.

The following is a list of keyword=value combinations that may be found in a MIFF file:

background-color=color
border-color=color
matte-color=color
these optional keywords reflects the image background, border, and matte colors respectively. A color can be a name (e.g. white) or a hex value (e.g. #ccc).
class=DirectClass
class=PseudoClass
the type of binary image data stored in the MIFF file. If this keyword is not present, DirectClass image data is assumed.
colors=value
the number of colors in a DirectClass image. For a PseudoClass image, this keyword specifies the size of the colormap. If this keyword is not present in the header, and the image is PseudoClass, a linear 256 color grayscale colormap is used with the image data.
The maximum number of colormap entries is 65535.
columns=value
the width of the image in pixels. This is a required keyword and has no default.
colorspace=RGB
colorspace=CMYK
the colorspace of the pixel data. The default is RGB.
compression=BZip
compression=RLE
compression=Zip
the type of algorithm used to compress the image data. If this keyword is not present, the image data is assumed to be uncompressed.
delay <1/100ths of a second>
the interframe delay in an image sequence. The maximum delay is 65535.
depth=8
depth=16
depth=32
depth of a single color value representing values from 0 to 255 (depth 8), 65535 (depth 16), or 4294967295 (depth 32). If this keyword is absent, a depth of 8 is assumed.
dispose value
GIF disposal method. Here are the valid methods:
Dispose Description

0

No disposal specified.

1

Do not dispose between frames.

2

Overwrite frame with background color from header.

3

Overwrite with previous frame.

gamma=value
gamma of the image. If it is not specified, a gamma of 1.0 (linear brightness response) is assumed,
id=ImageMagick
identify the file as a MIFF-format image file. This keyword is required and has no default. Although this keyword can appear anywhere in the header, it should start as the first keyword of the header in column 1. This will allow programs like file(1) to easily identify the file as MIFF.
iterations value
the number of times an image sequence loops before stopping.
label={value}
this optional keyword defines a short title or caption for the image. If any whitespace appears in the label, it must be enclosed within double quotes.
matte=True
matte=False
specifies whether a DirectClass image has matte data. Matte data is generally useful for image compositing. This keyword has no meaning for pseudocolor images.
montage=<width>x<height>{+-}<xoffset>{+-}< yoffset>
size and location of the individual tiles of a composite image. See X(1) for details about the geometry specification.
Use this keyword when the image is a composite of a number of different tiles. A tile consists of an image and optionally a border and a label. <width> is the size in pixels of each individual tile in the horizontal direction and <height> is the size in the vertical direction. Each tile must have an equal number of pixels in width and equal in height. However, the width can differ from the height. <xoffset> is the offset in number of pixels from the vertical edge of the composite image where the first tile of a row begins and <yoffset> is the offset from the horizontal edge where the first tile of a column begins.
If this keyword is specified, a directory of tile names must follow the image header. The format of the directory is explained below.
page=<width>x<height>{+-}<xoffset>{+-}< yoffset>
preferred size and location of an image canvas.
profile-icc=value
the number of bytes in the International Color Consortium color profile. The profile is defined by the ICC profile specification.
profile-iptc=value
the number of bytes in the IPTC Newsphoto profile. The profile is defined by the IPTCspecification .
profile-name=value
the number of bytes in the generic profile name where name identifies the profile. Name is substituted with any LATIN-1 string to form a unique generic profile identifier.
red-primary=x,y
green-primary=x,y
blue-primary=x,y
white-point=x,y
these optional keywords reflect the chromaticity primaries and white point.
rendering-intent=saturation
rendering-intent=perceptual
rendering-intent=absolute
rendering-intent=relative
Rendering intent is the CSS-1 property that has been defined by the International Color Consortium.
resolution=<x-resolution>x<y-resolution>
vertical and horizontal resolution of the image. See units for the specific resolution units (e.g. pixels per inch).
rows=value
the height of the image in pixels. This is a required keyword and has no default.
scene=value
the sequence number for this MIFF image file. This optional keyword is used when a MIFF image file is one in a sequence of files used in an animation.
signature=value
this optional keyword contains a string that uniquely identifies the image pixel contents. NIST's SHA-256 message digest algorithm is recommended.
units=pixels-per-inch
units=pixels-per-centimeter
image resolution units.

Other key value pairs are permitted. If a value contains whitespace it must be enclosed with braces as illustrated here:

   id=ImageMagick
   class=PseudoClass colors=256
   compression=RLE
   columns=1280 rows=1024
   scene=1
   signature=d79e1c308aa5bbcdeea8ed63df412da9
   copyright={Copyright (c) 2000 ImageMagick Studio}
   <FF>
   :

Note that keyword=value combinations may be separated by newlines or spaces and may occur in any order within the header. Comments (within braces) may appear anywhere before the colon.

The elements shown in the following table may appear after the header and before the image data. These elements appear in the order described in the following table if the keyword indicates that they exist.

Element Keyword Description

Image directory

montage

The directory consists of a name for each tile of the composite image separated by a newline character. The list is terminated with a NULL character.

ICC Profile

profile-icc

Binary color profile.

IPTC Profile

profile-iptc

Binary IPTC Newsphoto profile.

Generic Profiles

profile-<name>

Binary generic profile. Multiple named generic profiles may exist.

Next comes the binary image data itself. How the image data is formatted depends upon the class of the image as specified (or not specified) by the value of the class keyword in the header. All numeric values in the binary section are written with the most significant bytes occuring first (big-endian ordering).

DirectClass images (class=DirectClass) are continuous-tone, images stored as RGB (red, green, blue), RGBA (red, green, blue, alpha), CMYK (cyan, yellow, magenta, black), and CMYKA (cyan, yellow, magenta, black, alpha) intensity values as defined by the colorspace and matte keywords. The size of each intensity value depends on the depth of the image. The depth, number of bytes, and numeric range of each value are shown in the following table:

Depth Bytes Per Value Value Range

8

1

0..255

16

2

0..65535

32

4

0..4294967295

The alpha value (if it occurs) represents the degree of pixel opacity (zero is totally transparent).

PseudoClass images (class=PseudoClass) are colormapped RGB images. The colormap is stored as a series of red, green, and blue pixel values. The size of each colormap value depends on the image depth, as shown in the following table:

Depth Bytes Per Value Value Range BytePer Colormap Entry

8

1

0..255

3

16

2

0..65535

6

32

4

0..4294967295

12

The number of colormap entries is defined by the colors keyword. The colormap data occurs immediately following the header (or image directory if the montage keyword is in the header). Immediately following the colormap data is the PseudoClass image data. PseudoClass image data is an array of index values into the color map. The number of bytes comprising the index value depends on the number of colors in the image. The following table shows the number of bytes in each colormap index as determined by the colors keyword:

Colors Bytes Per Index Index Range

<=256

1

0..255

<=65535

2

0..65535

<=4294967295

4

0..4294967295

If matte is true, each colormap index is immediately followed by an equally-sized alpha value. The alpha value represents the degree of pixel opacity (zero is totally transparent).

The image data in a MIFF file may be uncompressed, runlength encoded, Zip compressed, or BZip compressed. The compression keyword in the header defines how the image data is compressed. Uncompressed pixels are stored one scanline at a time in row order. Runlength encoded compression counts runs of identical adjacent pixels and stores the pixels followed by a length byte (the number of identical pixels minus 1). Zip and BZip compression compresses each row of an image and precedes the compressed row with the length of compressed pixel bytes as a word in most significant byte first order.

MIFF files may contain more than one image. Simply concatenate each individual image (composed of a header and image data) into one file.


> Authors

John Cristy, magick-users@imagemagick.org , ImageMagick Studio.


Top of page
"Image manipulation software that works like magick"