Google

"http://www.w3.org/TR/html40/loose.dtd">
[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16. Shell Builtin Commands

- simple command
See 5.2 Precommand Modifiers.

. file [ arg ... ]
Read commands from file and execute them in the current shell environment.

If file does not contain a slash, or if PATH_DIRS is set, the shell looks in the components of $path to find the directory containing file. Files in the current directory are not read unless `.' appears somewhere in $path. If a file named `file.zwc' is found, is newer than file, and is the compiled form (created with the zcompile builtin) of file, then commands are read from that file instead of file.

If any arguments arg are given, they become the positional parameters; the old positional parameters are restored when the file is done executing. The exit status is the exit status of the last command executed.

: [ arg ... ]
This command does nothing, although normal argument expansions is performed which may have effects on shell parameters. A zero exit code is returned.

alias [ {+|-}gmrL ] [ name[=value] ... ]
For each name with a corresponding value, define an alias with that value. A trailing space in value causes the next word to be checked for alias expansion. If the -g flag is present, define a global alias; global aliases are expanded even if they do not occur in command position.

For each name with no value, print the value of name, if any. With no arguments, print all currently defined aliases. If the -m flag is given the arguments are taken as patterns (they should be quoted to preserve them from being interpreted as glob patterns), and the aliases matching these patterns are printed. When printing aliases and the -g or -r flags are present, then restrict the printing to global or regular aliases, respectively. Using `+' instead of `-', or ending the option list with a single `+', prevents the values of the aliases from being printed.

If the -L flag is present, then print each alias in a manner suitable for putting in a startup script. The exit status is nonzero if a name (with no value) is given for which no alias has been defined.

autoload [ {+|-}UXmt ] [ -wkz ] [ name ... ]
Equivalent to functions -u, with the exception of -X/+X, -w, -k and -z.

The flag -X may be used only inside a shell function, and may not be followed by a name. It causes the calling function to be marked for autoloading and then immediately loaded and executed, with the current array of positional parameters as arguments. This replaces the previous definition of the function. If no function definition is found, an error is printed and the function remains undefined and marked for autoloading.

The flag +X attempts to load each name as an autoloaded function, but does not execute it. The exit status is zero (success) if the function was not previously defined and a definition for it was found. This does not replace any existing definition of the function. The exit status is nonzero (failure) if the function was already defined or when no definition was found. In the latter case the function remains undefined and marked for autoloading.

The flag +X may be combined with either -k or -z to make the function be loaded using ksh-style or zsh-style autoloading, respectively. If neither is given, the current setting of the KSH_AUTOLOAD options determines how the function is loaded. With ksh-style autoloading, the contents of the file will not be executed immediately. Instead, the function created will contain the contents of the file plus a call to the function itself appended to it, thus given normal ksh autoloading behaviour on the first call to the function.

With the -w flag, the names are taken as names of files compiled with the zcompile builtin, and all functions defined in them are marked for autoloading.

bg [ job ... ]
job ... &
Put each specified job in the background, or the current job if none is specified.

bindkey
See 17.3 Zle Builtins.

break [ n ]
Exit from an enclosing for, while, until, select or repeat loop. If n is specified, then break n levels instead of just one.

builtin name [ args ... ]
Executes the builtin name, with the given args.

bye
Same as exit.

cap
See 21.2 The zsh/cap Module.

cd [ -sLP ] [ arg ]
cd [ -sLP ] old new
cd [ -sLP ] {+|-}n
Change the current directory. In the first form, change the current directory to arg, or to the value of $HOME if arg is not specified. If arg is `-', change to the value of $OLDPWD, the previous directory. Otherwise, if a directory named arg is not found in the current directory and arg does not begin with a slash, search each component of the shell parameter cdpath. If no directory is found and the option CDABLE_VARS is set, and a parameter named arg exists whose value begins with a slash, treat its value as the directory. In that case, the parameter is added to the named directory hash table.

The second form of cd substitutes the string new for the string old in the name of the current directory, and tries to change to this new directory.

The third form of cd extracts an entry from the directory stack, and changes to that directory. An argument of the form `+n' identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form `-n' counts from the right. If the PUSHD_MINUS option is set, the meanings of `+' and `-' in this context are swapped.

If the -s option is specified, cd refuses to change the current directory if the given pathname contains symlinks. If the -P option is given or the CHASE_LINKS option is set, symbolic links are resolved to their true values. If the -L option is given symbolic links are followed regardless of the state of the CHASE_LINKS option.

chdir
Same as cd.

clone
See 21.3 The zsh/clone Module.

command simple command
See 5.2 Precommand Modifiers.

comparguments
See 21.7 The zsh/computil Module.

compcall
See 21.4 The zsh/compctl Module.

compctl
See 21.4 The zsh/compctl Module.

compdescribe
See 21.7 The zsh/computil Module.

compfiles
See 21.7 The zsh/computil Module.

compgroups
See 21.7 The zsh/computil Module.

compquote
See 21.7 The zsh/computil Module.

comptags
See 21.7 The zsh/computil Module.

comptry
See 21.7 The zsh/computil Module.

compvalues
See 21.7 The zsh/computil Module.

continue [ n ]
Resume the next iteration of the enclosing for, while, until, select or repeat loop. If n is specified, break out of n-1 loops and resume at the nth enclosing loop.

declare
Same as typeset.

dirs [ -v ] [ arg ... ]
With no arguments, print the contents of the directory stack. If the -v option is given, number the directories in the stack when printing. Directories are added to this stack with the pushd command, and removed with the cd or popd commands. If arguments are specified, load them onto the directory stack, replacing anything that was there, and push the current directory onto the stack.

disable [ -afmr ] name ...
Temporarily disable the named hash table elements. The default is to disable builtin commands. This allows you to use an external command with the same name as a builtin command. The -a option causes disable to act on aliases. The -f option causes disable to act on shell functions. The -r options causes disable to act on reserved words. Without arguments all disabled hash table elements from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (which should be quoted to prevent them from undergoing filename expansion), and all hash table elements from the corresponding hash table matching these patterns are disabled. Disabled objects can be enabled with the enable command.

disown [ job ... ]
job ... &|
job ... &!
Remove the specified jobs from the job table; the shell will no longer report their status, and will not complain if you try to exit an interactive shell with them running or stopped. If no job is specified, disown the current job.

echo [ -neE ] [ arg ... ]
Write each arg on the standard output, with a space separating each one. If the -n flag is not present, print a newline at the end. echo recognizes the following escape sequences:

\a
bell character
\b
backspace
\c
suppress final newline
\e
escape
\f
form feed
\n
linefeed (newline)
\r
carriage return
\t
horizontal tab
\v
vertical tab
\\
backslash
\0NNN
character code in octal
\xNN
character code in hexadecimal

The -E flag, or the BSD_ECHO option, can be used to disable these escape sequences. In the latter case, -e flag can be used to enable them.

echotc
See 21.16 The zsh/termcap Module.

echoti
See 21.17 The zsh/terminfo Module.

emulate [ -LR ] {zsh|sh|ksh|csh}
Set up zsh options to emulate the specified shell as much as possible. csh will never be fully emulated. If the argument is not one of the shells listed above, zsh will be used as a default; more precisely, the tests performed on the argument are the same as those used to determine the emulation at startup based on the shell name, see 3.2 Compatibility . If the -R option is given, all options are reset to their default value corresponding to the specified emulation mode, except for certain options describing the interactive environment; otherwise, only those options likely to cause portability problems in scripts and functions are altered. If the -L option is given, the options LOCAL_OPTIONS and LOCAL_TRAPS will be set as well, causing the effects of the emulate command and any setopt and trap commands to be local to the immediately surrounding shell function, if any; normally these options are turned off in all emulation modes except ksh.

enable [ -afmr ] name ...
Enable the named hash table elements, presumably disabled earlier with disable. The default is to enable builtin commands. The -a option causes enable to act on aliases. The -f option causes enable to act on shell functions. The -r option causes enable to act on reserved words. Without arguments all enabled hash table elements from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (should be quoted) and all hash table elements from the corresponding hash table matching these patterns are enabled. Enabled objects can be disabled with the disable builtin command.

eval [ arg ... ]
Read the arguments as input to the shell and execute the resulting command in the current shell process.

exec simple command
See 5.2 Precommand Modifiers.

exit [ n ]
Exit the shell with the exit code specified by n; if none is specified, use the exit code from the last command executed. An EOF condition will also cause the shell to exit, unless the IGNORE_EOF option is set.

export [ name[=value] ... ]
The specified names are marked for automatic export to the environment of subsequently executed commands. Equivalent to typeset -gx. If a parameter specified does not already exist, it is created in the global scope.

false [ arg ... ]
Do nothing and return an exit code of 1.

fc [ -e ename ] [ -nlrdDfEim ] [ old=new ... ] [ first [ last ] ]
fc -ARWI [ filename ]
Select a range of commands from first to last from the history list. The arguments first and last may be specified as a number or as a string. A negative number is used as an offset to the current history event number. A string specifies the most recent event beginning with the given string. All substitutions old=new, if any, are then performed on the commands.

If the -l flag is given, the resulting commands are listed on standard output. If the -m flag is also given the first argument is taken as a pattern (should be quoted) and only the history events matching this pattern will be shown. Otherwise the editor program ename is invoked on a file containing these history events. If ename is not given, the value of the parameter FCEDIT is used. If ename is `-', no editor is invoked. When editing is complete, the edited command is executed.

If first is not specified, it will be set to -1 (the most recent event), or to -16 if the -l flag is given. If last is not specified, it will be set to first, or to -1 if the -l flag is given.

The flag -r reverses the order of the commands and the flag -n suppresses command numbers when listing. Also when listing, -d prints timestamps for each command, and -f prints full time-date stamps. Adding the -E flag causes the dates to be printed as `dd.mm.yyyy', instead of the default `mm/dd/yyyy'. Adding the -i flag causes the dates to be printed in ISO8601 `yyyy-mm-dd' format. With the -D flag, fc prints elapsed times.

`fc -R' reads the history from the given file, `fc -W' writes the history out to the given file, and `fc -A' appends the history out to the given file. If no filename is specified, the $HISTFILE is assumed. If the -I option is added to -R, only those events that are not already contained within the internal history list are added. If the -I option is added to -A or -W, only those events that are new since last incremental append/write to the history file are appended/written. In any case, the created file will have no more than $SAVEHIST entries.

fg [ job ... ]
job ...
Bring each specified job in turn to the foreground. If no job is specified, resume the current job.

float [ {+|-}EFghlrtux ] [ name[=value] ... ]
Equivalent to typeset -E, except that options irrelevant to floating point numbers are not permitted.

functions [ {+|-}UXmtu ] [ name ... ]
Equivalent to typeset -f.

getcap
See 21.2 The zsh/cap Module.

getln [ -AclneE ] name ...
Read the top value from the buffer stack and put it in the shell parameter name. Equivalent to read -zr.

getopts optstring name [ arg ... ]
Checks the args for legal options. If the args are omitted, use the positional parameters. A valid option argument begins with a `+' or a `-'. An argument not beginning with a `+' or a `-', or the argument `--', ends the options. optstring contains the letters that getopts recognizes. If a letter is followed by a `:', that option is expected to have an argument. The options can be separated from the argument by blanks.

Each time it is invoked, getopts places the option letter it finds in the shell parameter name, prepended with a `+' when arg begins with a `+'. The index of the next arg is stored in OPTIND. The option argument, if any, is stored in OPTARG.

The first option to be examined may be changed by explicitly assigning to OPTIND. OPTIND has an initial value of 1, and is normally reset to 1 upon exit from a shell function. OPTARG is not reset and retains its value from the most recent call to getopts. If either of OPTIND or OPTARG is explicitly unset, it remains unset, and the index or option argument is not stored. The option itself is still stored in name in this case.

A leading `:' in optstring causes getopts to store the letter of any invalid option in OPTARG, and to set name to `?' for an unknown option and to `:' when a required option is missing. Otherwise, getopts sets name to `?' and prints an error message when an option is invalid. The exit status is nonzero when there are no more options.

hash [ -Ldfmrv ] [ name[=value] ] ...
hash can be used to directly modify the contents of the command hash table, and the named directory hash table. Normally one would modify these tables by modifying one's PATH (for the command hash table) or by creating appropriate shell parameters (for the named directory hash table). The choice of hash table to work on is determined by the -d option; without the option the command hash table is used, and with the option the named directory hash table is used.

Given no arguments, and neither the -r or -f options, the selected hash table will be listed in full.

The -r option causes the selected hash table to be emptied. It will be subsequently rebuilt in the normal fashion. The -f option causes the selected hash table to be fully rebuilt immediately. For the command hash table this hashes all the absolute directories in the PATH, and for the named directory hash table this adds all users' home directories. These two options cannot be used with any arguments.

The -m option causes the arguments to be taken as patterns (which should be quoted) and the elements of the hash table matching those patterns are printed. This is the only way to display a limited selection of hash table elements.

For each name with a corresponding value, put `name' in the selected hash table, associating it with the pathname `value'. In the command hash table, this means that whenever `name' is used as a command argument, the shell will try to execute the file given by `value'. In the named directory hash table, this means that `value' may be referred to as `~name'.

For each name with no corresponding value, attempt to add name to the hash table, checking what the appropriate value is in the normal manner for that hash table. If an appropriate value can't be found, then the hash table will be unchanged.

The -v option causes hash table entries to be listed as they are added by explicit specification. If has no effect if used with -f.

If the -L flag is present, then each hash table entry is printed in the form of a call to hash.

history
Same as fc -l.

integer [ {+|-}ghilrtux ] [ name[=value] ... ]
Equivalent to typeset -i, except that options irrelevant to integers are not permitted.

jobs [ -dlprs ] [ job ... ]
jobs -Z string
Lists information about each given job, or all jobs if job is omitted. The -l flag lists process IDs, and the -p flag lists process groups. If the -r flag is specified only running jobs will be listed and if the -s flag is given only stopped jobs are shown. If the -d flag is given, the directory from which the job was started (which may not be the current directory of the job) will also be shown.

The -Z option replaces the shell's argument and environment space with the given string, truncated if necessary to fit. This will normally be visible in ps (man page ps(1)) listings. This feature is typically used by daemons, to indicate their state.

kill [ -s signal_name ] job ...
kill [ -sig ] job ...
kill -l [ sig ... ]
Sends either SIGTERM or the specified signal to the given jobs or processes. Signals are given by number or by names, without the `SIG' prefix. If the signal being sent is not `KILL' or `CONT', then the job will be sent a `CONT' signal if it is stopped. The argument job can be the process ID of a job not in the job list. In the third form, kill -l, if sig is not specified the signal names are listed. Otherwise, for each sig that is a name, the corresponding signal number is listed. For each sig that is a signal number or a number representing the exit status of a process which was terminated or stopped by a signal the name of the signal is printed.

let arg ...
Evaluate each arg as an arithmetic expression. See 10. Arithmetic Evaluation for a description of arithmetic expressions. The exit status is 0 if the value of the last expression is nonzero, and 1 otherwise.

limit [ -hs ] [ resource [ limit ] ] ...
Set or display resource limits. Unless the -s flag is given, the limit applies only the children of the shell. If -s is given without other arguments, the resource limits of the current shell is set to the previously set resource limits of the children.

If limit is not specified, print the current limit placed on resource, otherwise set the limit to the specified value. If the -h flag is given, use hard limits instead of soft limits. If no resource is given, print all limits.

resource can be one of:

addressspace
Maximum amount of address space used.
aiomemorylocked
Maximum amount of memory locked in RAM for AIO operations.
aiooperations
Maximum number of AIO operations.
cachedthreads
Maximum number of cached threads.
coredumpsize
Maximum size of a core dump.
cputime
Maximum CPU seconds per process.
datasize
Maximum data size (including stack) for each process.
descriptors
Maximum value for a file descriptor.
filesize
Largest single file allowed.
maxproc
Maximum number of processes.
maxpthreads
Maximum number of threads per process.
memorylocked
Maximum amount of memory locked in RAM.
memoryuse
Maximum resident set size.
resident
Maximum resident set size.
sockbufsize
Maximum size of all socket buffers.
stacksize
Maximum stack size for each process.
vmemorysize
Maximum amount of virtual memory.

Which of these resource limits are available depends on the system. resource can be abbreviated to any unambiguous prefix.

limit is a number, with an optional scaling factor, as follows:

nh
hours
nk
kilobytes (default)
nm
megabytes or minutes
[mm:]ss
minutes and seconds

local [ {+|-}AEFLRUZahilrtux [n]] [ name[=value] ] ...
Same as typeset, except that the options -g, and -f are not permitted. In this case the -x option does not force the use of -g, i.e. exported variables will be local to functions.

log
List all users currently logged in who are affected by the current setting of the watch parameter.

logout [ n ]
Same as exit, except that it only works in a login shell.

noglob simple command
See 5.2 Precommand Modifiers.

popd [ {+|-}n ]
Remove an entry from the directory stack, and perform a cd to the new top directory. With no argument, the current top entry is removed. An argument of the form `+n' identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings of `+' and `-' in this context are swapped.

print [ -bnrslzpNDPoOicm ] [ -un ] [ -R [ -en ]] [ arg ... ]
With no flags or with the flag `-', the arguments are printed on the standard output as described by echo, with the following differences: the escape sequence `\M-x' metafies the character x (sets the highest bit), `\C-x' produces a control character (`\C-@' and `\C-?' give the characters NUL and delete), and `\E' is a synonym for `\e'. Finally, if not in an escape sequence, `\' escapes the following character and is not printed.

-r
Ignore the escape conventions of echo.

-R
Emulate the BSD echo command, which does not process escape sequences unless the -e flag is given. The -n flag suppresses the trailing newline. Only the -e and -n flags are recognized after -R; all other arguments and options are printed.

-b
Recognize all the escape sequences defined for the bindkey command, see 17.3 Zle Builtins.

-m
Take the first argument as a pattern (should be quoted), and remove it from the argument list together with subsequent arguments that do not match this pattern.

-s
Place the results in the history list instead of on the standard output.

-n
Do not add a newline to the output.

-l
Print the arguments separated by newlines instead of spaces.

-N
Print the arguments separated and terminated by nulls.

-o
Print the arguments sorted in ascending order.

-O
Print the arguments sorted in descending order.

-i
If given together with -o or -O, sorting is performed case-independently.

-c
Print the arguments in columns.

-un
Print the arguments to file descriptor n.

-p
Print the arguments to the input of the coprocess.

-z
Push the arguments onto the editing buffer stack, separated by spaces.

-D
Treat the arguments as directory names, replacing prefixes with ~ expressions, as appropriate.

-P
Perform prompt expansion (see 12. Prompt Expansion).

pushd [ arg ]
pushd old new
pushd {+|-}n
Change the current directory, and push the old current directory onto the directory stack. In the first form, change the current directory to arg. If arg is not specified, change to the second directory on the stack (that is, exchange the top two entries), or change to $HOME if the PUSHD_TO_HOME option is set or if there is only one entry on the stack. Otherwise, arg is interpreted as it would be by cd. The meaning of old and new in the second form is also the same as for cd.

The third form of pushd changes directory by rotating the directory list. An argument of the form `+n' identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form `-n' counts from the right. If the PUSHD_MINUS option is set, the meanings of `+' and `-' in this context are swapped.

If the option PUSHD_SILENT is not set, the directory stack will be printed after a pushd is performed.

pushln [ arg ... ]
Equivalent to print -nz.

pwd [ -rLP ]
Print the absolute pathname of the current working directory. If the -r or the -P flag is specified, or the CHASE_LINKS option is set and the -L flag is not given, the printed path will not contain symbolic links.

r
Same as fc -e -.

read [ -rzpqAclneEt ] [ -k [ num ] ] [ -un ] [ name[?prompt] ] [ name ... ]
Read one line and break it into fields using the characters in $IFS as separators, except as noted below. The first field is assigned to the first name, the second field to the second name, etc., with leftover fields assigned to the last name. If name is omitted then REPLY is used for scalars and reply for arrays.

-r
Raw mode: a `\' at the end of a line does not signify line continuation and backslashes in the line don't quote the following character and are not removed.

-q
Read only one character from the terminal and set name to `y' if this character was `y' or `Y' and to `n' otherwise. With this flag set the return value is zero only if the character was `y' or `Y'. Note that this always reads from the terminal, even if used with the -p or -u or -z flags or with redirected input. This option may also be used within zle widgets.

-k [ num ]
Read only one (or num) characters. All are assigned to the first name, without word splitting. This flag is ignored when -q is present. Input is read from the terminal unless one of -u or -p is present. This option may also be used within zle widgets.

Note that num must be in the argument word that follows -k, not in the same word. See -u.

-z
Read one entry from the editor buffer stack and assign it to the first name, without word splitting. Text is pushed onto the stack with `print -z' or with push-line from the line editor (see 17. Zsh Line Editor). This flag is ignored when the -k or -q flags are present.

-e
-E
The input read is printed (echoed) to the standard output. If the -e flag is used, no input is assigned to the parameters.

-A
The first name is taken as the name of an array and all words are assigned to it.

-c
-l
These flags are allowed only if called inside a function used for completion (specified with the -K flag to compctl). If the -c flag is given, the words of the current command are read. If the -l flag is given, the whole line is assigned as a scalar. If both flags are present, -l is used and -c is ignored.

-n
Together with -c, the number of the word the cursor is on is read. With -l, the index of the character the cursor is on is read. Note that the command name is word number 1, not word 0, and that when the cursor is at the end of the line, its character index is the length of the line plus one.

-un
Input is read from file descriptor n, where n is a single digit and must not be separated from -u by any whitespace.

-p
Input is read from the coprocess.

-t
Test if input is available before attempting to read; if none is, return status 1 and do not set any variables. This is not available when reading from the editor buffer with -z, when called from within completion with -c or -l, with -q which clears the input queue before reading, or within zle where other mechanisms should be used to test for input.

Note that read does not attempt to alter the input processing mode. The default mode is canonical input, in which an entire line is read at a time, so usually `read -t' will not read anything until an entire line has been typed. However, when reading from the terminal with -k this is automatically handled; note that only availability of the first character is tested, so that e.g. `read -t -k 2' can still block on the second character.

If the first argument contains a `?', the remainder of this word is used as a prompt on standard error when the shell is interactive.

The value (exit status) of read is 1 when an end-of-file is encountered, or when -c or -l is present and the command is not called from a compctl function, or as described for -q. Otherwise the value is 0.

The behavior of some combinations of the -k, -p, -q, -u and -z flags is undefined. Presently -q cancels all the others, -p cancels -u, -k cancels -z, and otherwise -z cancels both -p and -u.

The -c or -l flags cancel any and all of -kpquz.

readonly
Same as typeset -r.

rehash
Same as hash -r.

return [ n ]
Causes a shell function or . script to return to the invoking script with the return status specified by n. If n is omitted, the return status is that of the last command executed.

If return was executed from a trap in a TRAPNAL function, the effect is different for zero and non-zero return status. With zero status (or after an implicit return at the end of the trap), the shell will return to whatever it was previously processing; with a non-zero status, the shell will behave as interrupted except that the return status of the trap is retained. Note that the numeric value of the signal which caused the trap is passed as the first argument, so the statement `return $((128+$1))' will return the same status as if the signal had not been trapped.

sched
See 21.14 The zsh/sched Module.

set [ {+|-}options | {+|-}o option_name ] ... [ {+|-}A [ name ] ] [ arg ... ]
Set the options for the shell and/or set the positional parameters, or declare and set an array. If the -s option is given, it causes the specified arguments to be sorted before assigning them to the positional parameters (or to the array name if -A is used). With +s sort arguments in descending order. For the meaning of the other flags, see 15. Options. Flags may be specified by name using the -o option.

If the -A flag is specified, name is set to an array containing the given args. if +A is used and name is an array, the given arguments will replace the initial elements of that array; if no name is specified, all arrays are printed. Otherwise the positional parameters are set. If no arguments are given, then the names and values of all parameters are printed on the standard output. If the only argument is `+', the names of all parameters are printed.

setcap
See 21.2 The zsh/cap Module.

setopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
Set the options for the shell. All options specified either with flags or by name are set. If no arguments are supplied, the names of all options currently set are printed. If the -m flag is given the arguments are taken as patterns (which should be quoted to protect them from filename expansion), and all options with names matching these patterns are set.

shift [ n ] [ name ... ]
The positional parameters ${n+1} ... are renamed to $1 ..., where n is an arithmetic expression that defaults to 1. If any names are given then the arrays with these names are shifted instead of the positional parameters.

source file [ arg ... ]
Same as ., except that the current directory is always searched and is always searched first, before directories in $path.

stat
See 21.15 The zsh/stat Module.

suspend [ -f ]
Suspend the execution of the shell (send it a SIGTSTP) until it receives a SIGCONT. Unless the -f option is given, this will refuse to suspend a login shell.

test [ arg ... ]
[ [ arg ... ] ]
Like the system version of test. Added for compatibility; use conditional expressions instead (see 11. Conditional Expressions).

times
Print the accumulated user and system times for the shell and for processes run from the shell.

trap [ arg [ sig ... ] ]
arg is a series of commands (usually quoted to protect it from immediate evaluation by the shell) to be read and executed when the shell receives sig. Each sig can be given as a number or as the name of a signal. If arg is `-', then all traps sig are reset to their default values. If arg is the empty string, then this signal is ignored by the shell and by the commands it invokes.

If sig is ZERR then arg will be executed after each command with a nonzero exit status. If sig is DEBUG then arg will be executed after each command. If sig is 0 or EXIT and the trap statement is executed inside the body of a function, then the command arg is executed after the function completes. If sig is 0 or EXIT and the trap statement is not executed inside the body of a function, then the command arg is executed when the shell terminates.

The trap command with no arguments prints a list of commands associated with each signal.

Note that traps defined with the trap builtin are slightly different from those defined as `TRAPNAL () { ... }', as the latter have their own function environment (line numbers, local variables, etc.) while the former use the environment of the command in which they were called. For example,

 
trap 'print $LINENO' DEBUG

will print the line number of a command executed after it has run, while

 
TRAPDEBUG() { print $LINENO; }

will always print the number zero.

true [ arg ... ]
Do nothing and return an exit code of 0.

ttyctl -fu
The -f option freezes the tty, and -u unfreezes it. When the tty is frozen, no changes made to the tty settings by external programs will be honored by the shell, except for changes in the size of the screen; the shell will simply reset the settings to their previous values as soon as each command exits or is suspended. Thus, stty and similar programs have no effect when the tty is frozen. Without options it reports whether the terminal is frozen or not.

type [ -wfpams ] name ...
Equivalent to whence -v.

typeset [ {+|-}AEFLRUZafghilrtuxm [n]] [ name[=value] ... ]
typeset -T [ {+|-}LRUZrux ] SCALAR[=value] array
Set or display attributes and values for shell parameters.

A parameter is created for each name that does not already refer to one. When inside a function, a new parameter is created for every name (even those that already exist), and is unset again when the function completes. See 14.4 Local Parameters. The same rules apply to special shell parameters, which retain their special attributes when made local.

For each name=value assignment, the parameter name is set to value. Note that arrays currently cannot be assigned in typeset expressions, only scalars and integers.

For each remaining name that refers to a parameter that is set, the name and value of the parameter are printed in the form of an assignment. Nothing is printed for newly-created parameters, or when any attribute flags listed below are given along with the name. Using `+' instead of minus to introduce an attribute turns it off.

If the -T option is given, exactly two (or zero) name arguments must be present. They represent a scalar and an array (in that order) that will be tied together in the manner of $PATH and $path. In other words, an array present in the latter variable appears as a scalar with the elements of the array joined by colons in the former. Only the scalar may have an initial value. Both the scalar and the array may otherwise be manipulated as normal. If one is unset, the other will automatically be unset too. There is no way of untying the variables without unsetting them, or converting the type of one of them with another typeset command; +T does not work, assigning an array to SCALAR is an error, and assigning a scalar to array sets it to be a single-element array. Note that both `typeset -xT ...' and `export -T ...' work, but only the scalar will be marked for export.

The -g (global) flag is treated specially: it means that any resulting parameter will not be restricted to local scope. Note that this does not necessarily mean that the parameter will be global, as the flag will apply to any existing parameter (even if unset) from an enclosing function. This flag does not affect the parameter after creation, hence it has no effect when listing existing parameters, nor does the flag +g have any effect except in combination with -m (see below).

If no name is present, the names and values of all parameters are printed. In this case the attribute flags restrict the display to only those parameters that have the specified attributes, and using `+' rather than `-' to introduce the flag suppresses printing of the values of parameters when there is no parameter name. Also, if the last option is the word `+', then names are printed but values are not.

If the -m flag is given the name arguments are taken as patterns (which should be quoted). With no attribute flags, all parameters (or functions with the -f flag) with matching names are printed. Note that -m is ignored if no patterns are given. If the +g flag is combined with -m, a new local parameter is created for every matching parameter that is not already local. Otherwise -m applies all other flags or assignments to the existing parameters. Except when assignments are made with name=value, using +m forces the matching parameters to be printed, even inside a function.

If no attribute flags are given and either no -m flag is present or the +m form was used, each parameter name printed is preceded by a list of the attributes of that parameter (array, association, exported, integer, readonly). If +m is used with attribute flags, and all those flags are introduced with +, the matching parameter names are printed but their values are not.

The following attribute flags may be specified:

-A
The names refer to associative array parameters; see 14.2 Array Parameters.

-L
Left justify and remove leading blanks from value. If n is nonzero, it defines the width of the field; otherwise it is determined by the width of the value of the first assignment. When the parameter is expanded, it is filled on the right with blanks or truncated if necessary to fit the field. Leading zeros are removed if the -Z flag is also set.

-R
Right justify and fill with leading blanks. If n is nonzero if defines the width of the field; otherwise it is determined by the width of the value of the first assignment. When the parameter is expanded, the field is left filled with blanks or truncated from the end.

-U
For arrays (but not for associative arrays), keep only the first occurrence of each duplicated value. This may also be set for colon-separated special parameters like PATH or FIGNORE, etc. This flag has a different meaning when used with -f; see below.

-Z
Right justify and fill with leading zeros if the first non-blank character is a digit and the -L flag has not been set. If n is nonzero it defines the width of the field; otherwise it is determined by the width of the value of the first assignment.

-a
The names refer to array parameters. An array parameter may be created this way, but it may not be assigned to in the typeset statement. When displaying, both normal and associative arrays are shown.

-f
The names refer to functions rather than parameters. No assignments can be made, and the only other valid flags are -t, -u and -U. The flag -t turns on execution tracing for this function. The -u and -U flags cause the function to be marked for autoloading; -U also causes alias expansion to be suppressed when the function is loaded. The fpath parameter will be searched to find the function definition when the function is first referenced; see 8. Functions.

-h
Hide: only useful for special parameters (those marked `<S>' in the table in 14.5 Parameters Set By The Shell), and for local parameters with the same name as a special parameter, though harmless for others. A special parameter with this attribute will not retain its special effect when made local. Thus after `typeset -h PATH', a function containing `typeset PATH' will create an ordinary local parameter without the usual behaviour of PATH. Alternatively, the local parameter may itself be given this attribute; hence inside a function `typeset -h PATH' creates an ordinary local parameter and the special PATH parameter is not altered in any way. It is also possible to create a local parameter using `typeset +h special', where the local copy of special will retain its special properties regardless of having the -h attribute. Global special parameters loaded from shell modules (currently those in zsh/mapfile and zsh/parameter) are automatically given the -h attribute to avoid name clashes.

-H
Hide value: specifies that typeset will not display the value of the parameter when listing parameters; the display for such parameters is always as if the `+' flag had been given. Use of the parameter is in other respects normal, and the option does not apply if the parameter is specified by name, or by pattern with the -m option. This is on by default for the parameters in the zsh/parameter and zsh/mapfile modules. Note, however, that unlike the -h flag this is also useful for non-special parameters.

-i
Use an internal integer representation. If n is nonzero it defines the output arithmetic base, otherwise it is determined by the first assignment.

-E
Use an internal double-precision floating point representation. On output the variable will be converted to scientific notation. If n is nonzero it defines the number of significant figures to display; the default is ten.

-F
Use an internal double-precision floating point representation. On output the variable will be converted to fixed-point decimal notation. If n is nonzero it defines the number of digits to display after the decimal point; the default is ten.

-l
Convert the result to lower case whenever the parameter is expanded. The value is not converted when assigned.

-r
The given names are marked readonly.

-t
Tags the named parameters. Tags have no special meaning to the shell. This flag has a different meaning when used with -f; see above.

-u
Convert the result to upper case whenever the parameter is expanded. The value is not converted when assigned. This flag has a different meaning when used with -f; see above.

-x
Mark for automatic export to the environment of subsequently executed commands. If the option GLOBAL_EXPORT is set, this implies the option -g, unless +g is also explicitly given; in other words the parameter is not made local to the enclosing function. This is for compatibility with previous versions of zsh.

ulimit [ -SHacdflmnpstv [ limit ] ... ]
Set or display resource limits of the shell and the processes started by the shell. The value of limit can be a number in the unit specified below or the value `unlimited'. By default, only soft limits are manipulated. If the -H flag is given use hard limits instead of soft limits. If the -S flag is given together with the -H flag set both hard and soft limits. If no options are used, the file size limit (-f) is assumed. If limit is omitted the current value of the specified resources are printed. When more than one resource values are printed the limit name and unit is printed before each value.

-a
Lists all of the current resource limits.
-c
512-byte blocks on the size of core dumps.
-d
K-bytes on the size of the data segment.
-f
512-byte blocks on the size of files written.
-l
K-bytes on the size of locked-in memory.
-m
K-bytes on the size of physical memory.
-n
open file descriptors.
-s
K-bytes on the size of the stack.
-t
CPU seconds to be used.
-u
processes available to the user.
-v
K-bytes on the size of virtual memory.

umask [ -S ] [ mask ]
The umask is set to mask. mask can be either an octal number or a symbolic value as described in man page chmod(1). If mask is omitted, the current value is printed. The -S option causes the mask to be printed as a symbolic value. Otherwise, the mask is printed as an octal number. Note that in the symbolic form the permissions you specify are those which are to be allowed (not denied) to the users specified.

unalias
Same as unhash -a.

unfunction
Same as unhash -f.

unhash [ -adfm ] name ...
Remove the element named name from an internal hash table. The default is remove elements from the command hash table. The -a option causes unhash to remove aliases. The -f option causes unhash to remove shell functions. The -d options causes unhash to remove named directories. If the -m flag is given the arguments are taken as patterns (should be quoted) and all elements of the corresponding hash table with matching names will be removed.

unlimit [ -hs ] resource ...
The resource limit for each resource is set to the hard limit. If the -h flag is given and the shell has appropriate privileges, the hard resource limit for each resource is removed. The resources of the shell process are only changed if the -s flag is given.

unset [ -fm ] name ...
Each named parameter is unset. Local parameters remain local even if unset; they appear unset within scope, but the previous value will still reappear when the scope ends.

Individual elements of associative array parameters may be unset by using subscript syntax on name, which should be quoted (or the entire command prefixed with noglob) to protect the subscript from filename generation.

If the -m flag is specified the arguments are taken as patterns (should be quoted) and all parameters with matching names are unset. Note that this cannot be used when unsetting associative array elements, as the subscript will be treated as part of the pattern.

unset -f is equivalent to unfunction.

unsetopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
Unset the options for the shell. All options specified either with flags or by name are unset. If no arguments are supplied, the names of all options currently unset are printed. If the -m flag is given the arguments are taken as patterns (which should be quoted to preserve them from being interpreted as glob patterns), and all options with names matching these patterns are unset.

vared
See 17.3 Zle Builtins.

wait [ job ... ]
Wait for the specified jobs or processes. If job is not given then all currently active child processes are waited for. Each job can be either a job specification or the process ID of a job in the job table. The exit status from this command is that of the job waited for.

whence [ -vcwfpams ] name ...
For each name, indicate how it would be interpreted if used as a command name.

-v
Produce a more verbose report.

-c
Print the results in a csh-like format. This takes precedence over -v.

-w
For each name, print `name: word' where word is one of alias, builtin, command, function, hashed, reserved or none, according as name corresponds to an alias, a built-in command, an external command, a shell function, a command defined with the hash builtin, a reserved word, or is not recognised. This takes precedence over -v and -c.

-f
Causes the contents of a shell function to be displayed, which would otherwise not happen unless the -c flag were used.

-p
Do a path search for name even if it is an alias, reserved word, shell function or builtin.

-a
Do a search for all occurrences of name throughout the command path. Normally only the first occurrence is printed.

-m
The arguments are taken as patterns (should be quoted), and the information is displayed for each command matching one of these patterns.

-s
If a pathname contains symlinks, print the symlink-free pathname as well.

where [ -wpms ] name ...
Equivalent to whence -ca.

which [ -wpams ] name ...
Equivalent to whence -c.

zcompile [ -U ] [ -z | -k ] [ -R | -M ] file [ name ... ]
zcompile -ca [ -m ] [ -R | -M ] file [ name ... ]
zcompile -t file [ name ... ]
This builtin command can be used to compile functions or scripts, storing the compiled form in a file, and to examine files containing the compiled form. This allows faster autoloading of functions and execution of scripts by avoiding parsing of the text when the files are read.

The first form (without the -c, -a or -t options) creates a compiled file. If only the file argument is given, the output file has the name `file.zwc' and will be placed in the same directory as the file. The shell will load the compiled file instead of the normal function file when the function is autoloaded; see 8. Functions for a description of how autoloaded functions are searched. The extension .zwc stands for `zsh word code'.

If there is at least one name argument, all the named files are compiled into the output file given as the first argument. If file does not end in .zwc, this extension is automatically appended. Files containing multiple compiled functions are called `digest' files, and are intended to be used as elements of the FPATH/fpath special array.

The second form, with the -c or -a options, writes the compiled definitions for all the named functions into file. For -c, the names must be functions currently defined in the shell, not those marked for autoloading. Undefined functions that are marked for autoloading may be written by using the -a option, in which case the fpath is searched and the contents of the definition files for those functions, if found, are compiled into file. If both -c and -a are given, names of both defined functions and functions marked for autoloading may be given. In either case, the functions in files written with the -c or -a option will be autoloaded as if the KSH_AUTOLOAD option were unset.

The reason for handling loaded and not-yet-loaded functions with different options is that some definition files for autoloading define multiple functions, including the function with the same name as the file, and, at the end, call that function. In such cases the output of `zcompile -c' does not include the additional functions defined in the file, and any other initialization code in the file is lost. Using `zcompile -a' captures all this extra information.

If the -m option is combined with -c or -a, the names are used as patterns and all functions whose names match one of these patterns will be written. If no name is given, the definitions of all functions currently defined or marked as autoloaded will be written.

The third form, with the -t option, examines an existing compiled file. Without further arguments, the names of the original files compiled into it are listed. The first line of output shows the version of the shell which compiled the file and how the file will be used (i.e. by reading it directly or by mapping it into memory). With arguments, nothing is output and the return value is set to zero if definitions for all names were found in the compiled file, and non-zero if the definition for at least one name was not found.

Other options:

-U
Aliases are not expanded when compiling the named files.

-R
When the compiled file is read, its contents are copied into the shell's memory, rather than memory-mapped (see -M). This happens automatically on systems that do not support memory mapping.

When compiling scripts instead of autoloadable functions, it is often desirable to use this option; otherwise the whole file, including the code to define functions which have already been defined, will remain mapped, consequently wasting memory.

-M
The compiled file is mapped into the shell's memory when read. This is done in such a way that multiple instances of the shell running on the same host will share this mapped file. If neither -R nor -M is given, the zcompile builtin decides what to do based on the size of the compiled file.

-k
-z
These options are used when the compiled file contains functions which are to be autoloaded. If -z is given, the function will be autoloaded as if the KSH_AUTOLOAD option is not set, even if it is set at the time the compiled file is read, while if the -k is given, the function will be loaded as if KSH_AUTOLOAD is set. If neither of these options is given, the function will be loaded as determined by the setting of the KSH_AUTOLOAD option at the time the compiled file is read.

These options may also appear as many times as necessary between the listed names to specify the loading style of all following functions, up to the next -k or -z.

The created file always contains two versions of the compiled format, one for big-endian machines and one for small-endian machines. The upshot of this is that the compiled file is machine independent and if it is read or mapped, only one half of the file is actually used (and mapped).

zformat
See 21.23 The zsh/zutil Module.

zftp
See 21.18 The zsh/zftp Module.

zle
See 17.3 Zle Builtins.

zmodload [ -dL ] [ ... ]
zmodload -e [ -A ] [ ... ]
zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
zmodload -A [ -L ] [ modalias[=module] ... ]
zmodload -R modalias ...
Performs operations relating to zsh's loadable modules. Loading of modules while the shell is running (`dynamical loading') is not available on all operating systems, or on all installations on a particular operating system, although the zmodload command itself is always available and can be used to manipulate modules built into versions of the shell executable without dynamical loading.

Without arguments the names of all currently loaded binary modules are printed. The -L option causes this list to be in the form of a series of zmodload commands. Forms with arguments are:

zmodload [ -i ] name ...
zmodload -u [ -i ] name ...
In the simplest case, zmodload loads a binary module. The module must be in a file with a name consisting of the specified name followed by a standard suffix, usually `.so' (`.sl' on HPUX). If the module to be loaded is already loaded and the -i option is given, the duplicate module is ignored. Otherwise zmodload prints an error message.

The named module is searched for in the same way a command is, using $module_path instead of $path. However, the path search is performed even when the module name contains a `/', which it usually does. There is no way to prevent the path search.

With -u, zmodload unloads modules. The same name must be given that was given when the module was loaded, but it is not necessary for the module to exist in the filesystem. The -i option suppresses the error if the module is already unloaded (or was never loaded).

Each module has a boot and a cleanup function. The module will not be loaded if its boot function fails. Similarly a module can only be unloaded if its cleanup function runs successfully.

zmodload -d [ -L ] [ name ]
zmodload -d name dep ...
zmodload -ud name [ dep ... ]
The -d option can be used to specify module dependencies. The modules named in the second and subsequent arguments will be loaded before the module named in the first argument.

With -d and one argument, all dependencies for that module are listed. With -d and no arguments, all module dependencies are listed. This listing is by default in a Makefile-like format. The -L option changes this format to a list of zmodload -d commands.

If -d and -u are both used, dependencies are removed. If only one argument is given, all dependencies for that module are removed.

zmodload -ab [ -L ]
zmodload -ab [ -i ] name [ builtin ... ]
zmodload -ub [ -i ] builtin ...
The -ab option defines autoloaded builtins. It defines the specified builtins. When any of those builtins is called, the module specified in the first argument is loaded. If only the name is given, one builtin is defined, with the same name as the module. -i suppresses the error if the builtin is already defined or autoloaded, regardless of which module it came from.

With -ab and no arguments, all autoloaded builtins are listed, with the module name (if different) shown in parentheses after the builtin name. The -L option changes this format to a list of zmodload -a commands.

If -b is used together with the -u option, it removes builtins previously defined with -ab. This is only possible if the builtin is not yet loaded. -i suppresses the error if the builtin is already removed (or never existed).

zmodload -ac [ -IL ]
zmodload -ac [ -iI ] name [ cond ... ]
zmodload -uc [ -iI ] cond ...
The -ac option is used to define autoloaded condition codes. The cond strings give the names of the conditions defined by the module. The optional -I option is used to define infix condition names. Without this option prefix condition names are defined.

If given no condition names, all defined names are listed (as a series of zmodload commands if the -L option is given).

The -uc option removes definitions for autoloaded conditions.

zmodload -ap [ -L ]
zmodload -ap [ -i ] name [ parameter ... ]
zmodload -up [ -i ] parameter ...
The -p option is like the -b and -c options, but makes zmodload work on autoloaded parameters instead.

zmodload -af [ -L ]
zmodload -af [ -i ] name [ function ... ]
zmodload -uf [ -i ] function ...
The -f option is like the -b, -p, and -c options, but makes zmodload work on autoloaded math functions instead.

zmodload -a [ -L ]
zmodload -a [ -i ] name [ builtin ... ]
zmodload -ua [ -i ] builtin ...
Equivalent to -ab and -ub.

zmodload -e [ -A ] [ string ... ]
The -e option without arguments lists all loaded modules; if the -A option is also given, module aliases corresponding to loaded modules are also shown. With arguments only the return status is set to zero if all strings given as arguments are names of loaded modules and to one if at least on string is not the name of a loaded module. This can be used to test for the availability of things implemented by modules. In this case, any aliases are automatically resolved and the -A flag is not used.

zmodload -A [ -L ] [ modalias[=module] ... ]
For each argument, if both modalias and module are given, define modalias to be an alias for the module module. If the module modalias is ever subsequently requested, either via a call to zmodload or implicitly, the shell will attempt to load module instead. If module is not given, show the definition of modalias. If no arguments are given, list all defined module aliases. When listing, if the -L flag was also given, list the definition as a zmodload command to recreate the alias.

The existence of aliases for modules is completely independent of whether the name resolved is actually loaded as a module: while the alias exists, loading and unloading the module under any alias has exactly the same effect as using the resolved name, and does not affect the connection between the alias and the resolved name which can be removed either by zmodload -R or by redefining the alias. Chains of aliases (i.e. where the first resolved name is itself an alias) are valid so long as these are not circular. As the aliases take the same format as module names, they may include path separators: in this case, there is no requirement for any part of the path named to exist as the alias will be resolved first. For example, `any/old/alias' is always a valid alias.

Dependencies added to aliased modules are actually added to the resolved module; these remain if the alias is removed. It is valid to create an alias whose name is one of the standard shell modules and which resolves to a different module. However, if a module has dependencies, it will not be possible to use the module name as an alias as the module will already be marked as a loadable module in its own right.

Apart from the above, aliases can be used in the zmodload command anywhere module names are required. However, aliases will not be shown in lists of loaded modules with a bare `zmodload'.

zmodload -R modalias ...
For each modalias argument that was previously defined as a module alias via zmodload -A, delete the alias. If any was not defined, an error is caused and the remainder of the line is ignored.

Note that zsh makes no distinction between modules that were linked into the shell and modules that are loaded dynamically. In both cases this builtin command has to be used to make available the builtins and other things defined by modules (unless the module is autoloaded on these definitions). This is true even for systems that don't support dynamic loading of modules.

zparseopts
See 21.23 The zsh/zutil Module.

zprof
See 21.21 The zsh/zprof Module.

zpty
See 21.22 The zsh/zpty Module.

zregexparse
See 21.23 The zsh/zutil Module.

zstyle
See 21.23 The zsh/zutil Module.


[ << ] [ >> ]           [Top] [Contents] [Index] [ ? ]

This document was generated by Peter Stephenson on August, 9 2002 using texi2html