From listmaint@AMSAT.Org Sun Jan 8 09:59 PST 1995 To: ans@amsat.org SB SAT @ AMSAT $ANS-008.01 FINAL FREQUENCIES SELECTED FOR PHASE 3-D HR AMSAT NEWS SERVICE BULLETIN 008.01 FROM AMSAT HQ SILVER SPRING, MD JANUARY 8, 1995 TO ALL RADIO AMATEURS BT BID: $ANS-008.01 Following a series of discussions, a number of iterations and intensive study, the builders of the Phase 3-D communications equipment have made their final selections of the frequencies to be employed on the satellite scheduled to be launched in April 1996. These selections have since been approved by the P3D Project Leader Dr. Karl Meinzer (DJ4ZC). These frequencies were carefully selected to minimize mutual interference with other amateur satellites and have been coordinated with IARU bandplans by the P3D Frequency Coordinator, Freddy de Guchteneire (ON6UG) with assistance from Peter Guelzow (DB2OS) and Werner Haas (DJ5KQ). Crystals have been ordered for all receivers and transmitters to implement these frequencies. In accordance with the Phase 3D design concept, all receivers and transmitters are connected to the IF matrix which allows interconnection of the various receivers and transmitters to create what have been known as transponders on former amateur satellites. The selected Phase 3D frequencies are as follows: UPLINKS BAND DIGITAL (MHZ) ANALOG (MHZ) CENTER (MHz) ------ ------------- ------------ ------------ 15M N/A 21.210 - 21.250 21.230 2M 145.800 - 145.840 145.840 - 145.990 145.915 70CM 435.300 - 435.550 435.550 - 435.800 435.675 23CM(1) 1269.000 - 1269.250 1269.250 - 1269.500 1269.375 23CM(2) 1268.075 - 1268.325 1268.325 - 1268.575 1268.450 13CM(1) 2400.100 - 2400.350 2400.350 - 2400.600 2400.475 13CM(2) 2446.200 - 2446.450 2446.450 - 2446.700 2446.575 6CM 5668.350 - 5668.550 5668.550 - 5668.800 5668.675 DOWNLINKS BAND DIGITAL (MHz) ANALOG (MHz) CENTER (MHz) ---- ------------ ------------ ------------ 10M 29.330 MHz +/-5 KHz (To be used for digitized voice bulletins) 2M 145.955 - 145.990 145.805 - 145.955 145.880 70CM 435.900 - 436.200 435.475 - 435.725 435.600 13CM 2400.650 - 2400.950 2400.225 - 2400.475 2400.350 3CM 10451.450 -10451.750 10451.025 -10451.275 10451.150 1.5CM 24048.450 -24048.750 24048.025 -24048.275 24048.150 All downlink passbands are inverted from the uplink passbands. BEACONS: BAND Beacon-1 Beacon-2 ----- -------- -------- 2M N/A N/A 70CM 435.450 435.850 13CM 2400.200 2400.600 3CM 10451.000 10451.400 1.5CM 24048.000 24048.400 Note: The absence of a 2M beacon is due to strictly to characteristics of the IF matrix and the limited bandwidth available on that band. Studies are underway with the intent of providing a 2M beacon but it is not clear, at this time, that this effort will be successful. The beacons on the other bands are for various purposes including providing spacecraft engineering data to the command stations. All beacons can be modulated with 400 bits per second BPSK and possibly other formats. [The AMSAT News Service wishes to thank Phase 3-D International Satellite Team members Freddy de Guchteneire (ON6UG), Peter Guelzow (DB2OS), Werner Haas (DJ5KQ) and Karl Meinzer (DJ4ZC) for the information that went into this bulletin.]