/* This file is part of the GNU plotutils package.  Copyright (C) 1995,
   1996, 1997, 1998, 1999, 2000, 2005, Free Software Foundation, Inc.

   The GNU plotutils package is free software.  You may redistribute it
   and/or modify it under the terms of the GNU General Public License as
   published by the Free Software foundation; either version 2, or (at your
   option) any later version.

   The GNU plotutils package is distributed in the hope that it will be
   useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received a copy of the GNU General Public License along
   with the GNU plotutils package; see the file COPYING.  If not, write to
   the Free Software Foundation, Inc., 51 Franklin St., Fifth Floor,
   Boston, MA 02110-1301, USA. */

// The common_output class: subclassed from the output class, 
// providing support for dotted/dashed arcs and circles, and for 
// rounded boxes (possible dotted/dashed).

#include "pic.h"
#include "output.h"
#include "common.h"

// output a dashed circle as a series of arcs
void
common_output::dashed_circle(const position &cent, double rad, const line_type &lt)
{
  assert (lt.type == line_type::dashed);
  line_type slt = lt;
  slt.type = line_type::solid;
  double dash_angle = lt.dash_width/rad; // dash angle in radians
  int ndashes;
  double gap_angle;

  if (dash_angle >= M_PI/4.0) 
    {
      if (dash_angle < M_PI/2.0) 
	{
	  gap_angle = M_PI/2.0 - dash_angle;
	  ndashes = 4;
	}
      else if (dash_angle < M_PI) 
	{
	  gap_angle = M_PI - dash_angle;
	  ndashes = 2;
	}
      else 
	{
	  circle (cent, rad, slt, -1.0);
	  return;
	}
    }
  else 
    {
      ndashes = 4 * int(ceil(M_PI/(4.0*dash_angle)));
      gap_angle = (M_PI*2.0)/ndashes - dash_angle;
    }
  for (int i = 0; i < ndashes; i++) 
    {
      double start_angle = i*(dash_angle+gap_angle) - 0.5 * dash_angle;
      solid_arc (cent, rad, start_angle, start_angle + dash_angle, lt);
    }
}

// output a dotted circle as a series of dots
void 
common_output::dotted_circle(const position &cent, double rad, const line_type &lt)
{
  double gap_angle = lt.dash_width/rad;	// gap angle in radians
  int ndots;
  double ang = 0.0;

  assert (lt.type == line_type::dotted);
  if (gap_angle >= M_PI/2.0) 
    {
      // always have at least 2 dots
      gap_angle = M_PI;
      ndots = 2;
    }
  else 
    {
      ndots = 4*int(M_PI/(2.0*gap_angle));
      gap_angle = (M_PI*2.0)/ndots;
    }
  for (int i = 0; i < ndots; i++, ang += gap_angle)
    dot (cent + position(cos(ang), sin(ang))*rad, lt);
}

// return non-zero iff we can compute a center
int
compute_arc_center(const position &start, const position &cent, const position &end, position *result)
{
  // This finds the point along the vector from start to cent that
  // is equidistant between start and end.
  distance c = cent - start;
  distance e = end - start;
  double n = c*e;
  if (n == 0.0)
    return 0;
  else
    {
      *result = start + c*((e*e)/(2.0*n));
      return 1;
    }
}

// output a dashed arc as a series of arcs
void
common_output::dashed_arc(const position &start, const position &cent, const position &end, const line_type &lt)
{
  assert (lt.type == line_type::dashed);
  position c;
  if (!compute_arc_center(start, cent, end, &c)) 
    {
      line(start, &end, 1, lt);
      return;
    }
  distance start_offset = start - c;
  distance end_offset = end - c;
  double start_angle = atan2(start_offset.y, start_offset.x);
  double end_angle = atan2(end_offset.y, end_offset.x);
  double rad = hypot(c - start);
  double dash_angle = lt.dash_width/rad;
  double total_angle = end_angle - start_angle;
  while (total_angle < 0)
    total_angle += M_PI + M_PI;
  if (total_angle <= dash_angle*2.0) 
    {
      solid_arc(cent, rad, start_angle, end_angle, lt);
      return;
    }
  int ndashes = int((total_angle - dash_angle)/(dash_angle*2.0) + 0.5);
  double dash_and_gap_angle = (total_angle - dash_angle)/ndashes;
  for (int i = 0; i <= ndashes; i++)
    solid_arc(cent, rad, start_angle + i*dash_and_gap_angle,
	      start_angle + i*dash_and_gap_angle + dash_angle, lt);
}

// output a dotted arc as a series of dots
void
common_output::dotted_arc(const position &start, const position &cent, const position &end, const line_type &lt)
{
  assert (lt.type == line_type::dotted);
  position c;
  if (!compute_arc_center(start, cent, end, &c)) 
    {
      line(start, &end, 1, lt);
      return;
    }
  distance start_offset = start - c;
  distance end_offset = end - c;
  double start_angle = atan2(start_offset.y, start_offset.x);
  double total_angle = atan2(end_offset.y, end_offset.x) - start_angle;
  while (total_angle < 0)
    total_angle += M_PI + M_PI;
  double rad = hypot(c - start);
  int ndots = int(total_angle/(lt.dash_width/rad) + .5);
  if (ndots == 0)
    dot (start, lt);
  else 
    {
      for (int i = 0; i <= ndots; i++) 
	{
	  double a = start_angle + (total_angle*i)/ndots;
	  dot (cent + position(cos(a), sin(a))*rad, lt);
	}
    }
}

// output a solid arc, of the sort used in dashing
void
common_output::solid_arc(const position &cent, double rad, double start_angle, double end_angle, const line_type &lt)
{
  line_type slt = lt;
  slt.type = line_type::solid;
  arc (cent + position(cos(start_angle), sin(start_angle))*rad,
       cent,
       cent + position(cos(end_angle), sin(end_angle))*rad,
       slt);
}

// output a rounded box (of one of several line types)
void
common_output::rounded_box(const position &cent, const distance &dim, double rad, const line_type &lt, double fill)
{
  if (fill >= 0.0)
    filled_rounded_box(cent, dim, rad, fill);
  switch (lt.type) 
    {
    case line_type::invisible:
      break;
    case line_type::dashed:
      dashed_rounded_box(cent, dim, rad, lt);
      break;
    case line_type::dotted:
      dotted_rounded_box(cent, dim, rad, lt);
      break;
    case line_type::solid:
      solid_rounded_box(cent, dim, rad, lt);
      break;
    default:
      assert (0);
    }
}

// output a dashed rounded box as a series of arcs
void
common_output::dashed_rounded_box(const position &cent, const distance &dim, double rad, const line_type &lt)
{
  line_type slt = lt;
  slt.type = line_type::solid;

  double hor_length = dim.x + (M_PI/2.0 - 2.0)*rad;
  int n_hor_dashes = int(hor_length/(lt.dash_width*2.0) + 0.5);
  double hor_gap_width = (n_hor_dashes != 0
			  ? hor_length/n_hor_dashes - lt.dash_width
			  : 0.0);

  double vert_length = dim.y + (M_PI/2.0 - 2.0)*rad;
  int n_vert_dashes = int(vert_length/(lt.dash_width*2.0) + 0.5);
  double vert_gap_width = (n_vert_dashes != 0
			   ? vert_length/n_vert_dashes - lt.dash_width
			   : 0.0);
  // Each corner arc must be split into two for dashing,
  // with one part dashed using vert_gap_width, and the other
  // using hor_gap_width.
  double offset = lt.dash_width/2.0;
  dash_arc(cent + position(dim.x/2.0 - rad, -dim.y/2.0 + rad), rad,
	   -M_PI/4.0, 0, slt, lt.dash_width, vert_gap_width, &offset);
  dash_line(cent + position(dim.x/2.0, -dim.y/2.0 + rad),
	    cent + position(dim.x/2.0, dim.y/2.0 - rad),
	    slt, lt.dash_width, vert_gap_width, &offset);
  dash_arc(cent + position(dim.x/2.0 - rad, dim.y/2.0 - rad), rad,
	   0, M_PI/4.0, slt, lt.dash_width, vert_gap_width, &offset);

  offset = lt.dash_width/2.0;
  dash_arc(cent + position(dim.x/2.0 - rad, dim.y/2.0 - rad), rad,
	   M_PI/4.0, M_PI/2, slt, lt.dash_width, hor_gap_width, &offset);
  dash_line(cent + position(dim.x/2.0 - rad, dim.y/2.0),
	    cent + position(-dim.x/2.0 + rad, dim.y/2.0),
	    slt, lt.dash_width, hor_gap_width, &offset);
  dash_arc(cent + position(-dim.x/2.0 + rad, dim.y/2.0 - rad), rad,
	   M_PI/2, 3*M_PI/4.0, slt, lt.dash_width, hor_gap_width, &offset);

  offset = lt.dash_width/2.0;
  dash_arc(cent + position(-dim.x/2.0 + rad, dim.y/2.0 - rad), rad,
	   3.0*M_PI/4.0, M_PI, slt, lt.dash_width, vert_gap_width, &offset);
  dash_line(cent + position(-dim.x/2.0, dim.y/2.0 - rad),
	    cent + position(-dim.x/2.0, -dim.y/2.0 + rad),
	    slt, lt.dash_width, vert_gap_width, &offset);
  dash_arc(cent + position(-dim.x/2.0 + rad, -dim.y/2.0 + rad), rad,
	   M_PI, 5.0*M_PI/4.0, slt, lt.dash_width, vert_gap_width, &offset);

  offset = lt.dash_width/2.0;
  dash_arc(cent + position(-dim.x/2.0 + rad, -dim.y/2.0 + rad), rad,
	   5*M_PI/4.0, 3*M_PI/2.0, slt, lt.dash_width, hor_gap_width, &offset);
  dash_line(cent + position(-dim.x/2.0 + rad, -dim.y/2.0),
	    cent + position(dim.x/2.0 - rad, -dim.y/2.0),
	    slt, lt.dash_width, hor_gap_width, &offset);
  dash_arc(cent + position(dim.x/2.0 - rad, -dim.y/2.0 + rad), rad,
	   3*M_PI/2, 7*M_PI/4, slt, lt.dash_width, hor_gap_width, &offset);
}

// Private, used by dashed_rounded_box.
void
common_output::dash_arc(const position &cent, double rad, double start_angle, double end_angle, const line_type &lt, double dash_width, double gap_width, double *offsetp)
{
  double length = (end_angle - start_angle)*rad;
  double pos = 0.0;
  for (;;) 
    {
      if (*offsetp >= dash_width) 
	{
	  double rem = dash_width + gap_width - *offsetp;
	  if (pos + rem > length) 
	    {
	      *offsetp += length - pos;
	      break;
	    }
	  else 
	    {
	      pos += rem;
	      *offsetp = 0.0;
	    }
	}
      else 
	{
	  double rem = dash_width  - *offsetp;
	  if (pos + rem > length) 
	    {
	      solid_arc(cent, rad, start_angle + pos/rad, end_angle, lt);
	      *offsetp += length - pos;
	      break;
	    }
	  else 
	    {
	      solid_arc(cent, rad, start_angle + pos/rad,
			start_angle + (pos + rem)/rad, lt);
	      pos += rem;
	      *offsetp = dash_width;
	    }
	}
    }
}

// Private, used by dashed_rounded_box.
void
common_output::dash_line(const position &start, const position &end, const line_type &lt, double dash_width, double gap_width, double *offsetp)
{
  distance dist = end - start;
  double length = hypot(dist);
  if (length == 0.0)
    return;
  double pos = 0.0;
  for (;;) 
    {
      if (*offsetp >= dash_width) 
	{
	  double rem = dash_width + gap_width - *offsetp;
	  if (pos + rem > length) 
	    {
	      *offsetp += length - pos;
	      break;
	    }
	  else 
	    {
	      pos += rem;
	      *offsetp = 0.0;
	    }
	}
      else 
	{
	  double rem = dash_width  - *offsetp;
	  if (pos + rem > length) 
	    {
	      line(start + dist*(pos/length), &end, 1, lt);
	      *offsetp += length - pos;
	      break;
	    }
	  else 
	    {
	      position p(start + dist*((pos + rem)/length));
	      line(start + dist*(pos/length), &p, 1, lt);
	      pos += rem;
	      *offsetp = dash_width;
	    }
	}
    }
}

// output a dotted rounded box as a series of dots
void
common_output::dotted_rounded_box(const position &cent, const distance &dim, double rad, const line_type &lt)
{
  line_type slt = lt;
  slt.type = line_type::solid;

  double hor_length = dim.x + (M_PI/2.0 - 2.0)*rad;
  int n_hor_dots = int(hor_length/lt.dash_width + .5);
  double hor_gap_width = (n_hor_dots != 0
			  ? hor_length/n_hor_dots
			  : lt.dash_width);

  double vert_length = dim.y + (M_PI/2.0 - 2.0)*rad;
  int n_vert_dots = int(vert_length/lt.dash_width + .5);
  double vert_gap_width = (n_vert_dots != 0
			   ? vert_length/n_vert_dots
			   : lt.dash_width);
  double epsilon = lt.dash_width/(rad*100.0);

  double offset = 0.0;
  dot_arc(cent + position(dim.x/2.0 - rad, -dim.y/2.0 + rad), rad,
	  -M_PI/4.0, 0, slt, vert_gap_width, &offset);
  dot_line(cent + position(dim.x/2.0, -dim.y/2.0 + rad),
	   cent + position(dim.x/2.0, dim.y/2.0 - rad),
	   slt, vert_gap_width, &offset);
  dot_arc(cent + position(dim.x/2.0 - rad, dim.y/2.0 - rad), rad,
	  0, M_PI/4.0 - epsilon, slt, vert_gap_width, &offset);

  offset = 0.0;
  dot_arc(cent + position(dim.x/2.0 - rad, dim.y/2.0 - rad), rad,
	  M_PI/4.0, M_PI/2, slt, hor_gap_width, &offset);
  dot_line(cent + position(dim.x/2.0 - rad, dim.y/2.0),
	   cent + position(-dim.x/2.0 + rad, dim.y/2.0),
	   slt, hor_gap_width, &offset);
  dot_arc(cent + position(-dim.x/2.0 + rad, dim.y/2.0 - rad), rad,
	  M_PI/2, 3*M_PI/4.0 - epsilon, slt, hor_gap_width, &offset);

  offset = 0.0;
  dot_arc(cent + position(-dim.x/2.0 + rad, dim.y/2.0 - rad), rad,
	  3.0*M_PI/4.0, M_PI, slt, vert_gap_width, &offset);
  dot_line(cent + position(-dim.x/2.0, dim.y/2.0 - rad),
	   cent + position(-dim.x/2.0, -dim.y/2.0 + rad),
	   slt, vert_gap_width, &offset);
  dot_arc(cent + position(-dim.x/2.0 + rad, -dim.y/2.0 + rad), rad,
	  M_PI, 5.0*M_PI/4.0 - epsilon, slt, vert_gap_width, &offset);

  offset = 0.0;
  dot_arc(cent + position(-dim.x/2.0 + rad, -dim.y/2.0 + rad), rad,
	  5*M_PI/4.0, 3*M_PI/2.0, slt, hor_gap_width, &offset);
  dot_line(cent + position(-dim.x/2.0 + rad, -dim.y/2.0),
	   cent + position(dim.x/2.0 - rad, -dim.y/2.0),
	   slt, hor_gap_width, &offset);
  dot_arc(cent + position(dim.x/2.0 - rad, -dim.y/2.0 + rad), rad,
	  3*M_PI/2, 7*M_PI/4 - epsilon, slt, hor_gap_width, &offset);
}

// Private, used by dotted_rounded_box.
void
common_output::dot_arc(const position &cent, double rad, double start_angle, double end_angle, const line_type &lt, double gap_width, double *offsetp)
{
  double length = (end_angle - start_angle)*rad;
  double pos = 0.0;
  for (;;) 
    {
      if (*offsetp == 0.0) 
	{
	  double ang = start_angle + pos/rad;
	  dot (cent + position(cos(ang), sin(ang))*rad, lt);
	}
      double rem = gap_width - *offsetp;
      if (pos + rem > length) 
	{
	  *offsetp += length - pos;
	  break;
	}
      else 
	{
	  pos += rem;
	  *offsetp = 0.0;
	}
    }
}

// Private, used by dotted_rounded_box.
void
common_output::dot_line(const position &start, const position &end, const line_type &lt, double gap_width, double *offsetp)
{
  distance dist = end - start;
  double length = hypot(dist);
  if (length == 0.0)
    return;
  double pos = 0.0;
  for (;;) 
    {
      if (*offsetp == 0.0)
	dot (start + dist*(pos/length), lt);
      double rem = gap_width - *offsetp;
      if (pos + rem > length) 
	{
	  *offsetp += length - pos;
	  break;
	}
      else 
	{
	  pos += rem;
	  *offsetp = 0.0;
	}
    }
}

// draw a solid rounded box, from arcs and lines
void
common_output::solid_rounded_box(const position &cent, const distance &dim, double rad, const line_type &lt)
{
  position tem = cent - dim/2.0;
  arc(tem + position(0.0, rad),
      tem + position(rad, rad),
      tem + position(rad, 0.0),
      lt);
  tem = cent + position(-dim.x/2.0, dim.y/2.0);
  arc(tem + position(rad, 0.0),
      tem + position(rad, -rad),
      tem + position(0.0, -rad),
      lt);
  tem = cent + dim/2.0;
  arc(tem + position(0.0, -rad),
      tem + position(-rad, -rad),
      tem + position(-rad, 0.0),
      lt);
  tem = cent + position(dim.x/2.0, -dim.y/2.0);
  arc(tem + position(-rad, 0.0),
      tem + position(-rad, rad),
      tem + position(0.0, rad),
      lt);
  position end;
  end = cent + position(-dim.x/2.0, dim.y/2.0 - rad);
  line(cent - dim/2.0 + position(0.0, rad), &end, 1, lt);
  end = cent + position(dim.x/2.0 - rad, dim.y/2.0);
  line(cent + position(-dim.x/2.0 + rad, dim.y/2.0), &end, 1, lt);
  end = cent + position(dim.x/2.0, -dim.y/2.0 + rad);
  line(cent + position(dim.x/2.0, dim.y/2.0 - rad), &end, 1, lt);
  end = cent + position(-dim.x/2.0 + rad, -dim.y/2.0);
  line(cent + position(dim.x/2.0 - rad, -dim.y/2.0), &end, 1, lt);
}

// Draw a filled rounded box, by drawing filled circles etc.
// Not used by libplot driver.
void
common_output::filled_rounded_box(const position &cent, const distance &dim, double rad, double fill)
{
  line_type ilt;
  ilt.type = line_type::invisible;
  circle(cent + position(dim.x/2.0 - rad, dim.y/2.0 - rad), rad, ilt, fill);
  circle(cent + position(-dim.x/2.0 + rad, dim.y/2.0 - rad), rad, ilt, fill);
  circle(cent + position(-dim.x/2.0 + rad, -dim.y/2.0 + rad), rad, ilt, fill);
  circle(cent + position(dim.x/2.0 - rad, -dim.y/2.0 + rad), rad, ilt, fill);
  position vec[4];
  vec[0] = cent + position(dim.x/2.0, dim.y/2.0 - rad);
  vec[1] = cent + position(-dim.x/2.0, dim.y/2.0 - rad);
  vec[2] = cent + position(-dim.x/2.0, -dim.y/2.0 + rad);
  vec[3] = cent + position(dim.x/2.0, -dim.y/2.0 + rad);
  polygon(vec, 4, ilt, fill);
  vec[0] = cent + position(dim.x/2.0 - rad, dim.y/2.0);
  vec[1] = cent + position(-dim.x/2.0 + rad, dim.y/2.0);
  vec[2] = cent + position(-dim.x/2.0 + rad, -dim.y/2.0);
  vec[3] = cent + position(dim.x/2.0 - rad, -dim.y/2.0);
  polygon(vec, 4, ilt, fill);
}