# Makefile.in --
#
# This file is a Makefile for Sample TEA Extension. If it has the name
# "Makefile.in" then it is a template for a Makefile; to generate the
# actual Makefile, run "./configure", which is a configuration script
# generated by the "autoconf" program (constructs like "@foo@" will get
# replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 1.17 2005/11/20 21:29:13 hobbs Exp $
#========================================================================
# Edit the following few lines when writing a new extension
#========================================================================
#========================================================================
# Enumerate the names of the source files included in this package.
# This will be used when a dist target is added to the Makefile.
# EXTRA_SOURCES will be replaced by WIN_SOURCES or UNIX_SOURCES, as is
# appropriate for your platform. It is not important to specify the
# directory, as long as it is the $(srcdir) or in the generic, win or
# unix subdirectory.
#========================================================================
PKG_SOURCES = @PKG_SOURCES@
PKG_OBJECTS = @PKG_OBJECTS@ @LIBOBJS@
#========================================================================
# Identify the object files. This replaces .c with .$(OBJEXT) for all
# the named source files. These objects are created and linked into the
# final library. In these do not correspond directly to the source files
# above, you will need to enumerate the object files here.
# Normally we would use $(OBJEXT), but certain make executables won't do
# the extra macro in a macro conversion properly.
#
# "tclx_LIB_FILE" refers to the library (dynamic or static as per
# configuration options) composed of the named objects.
#========================================================================
TEST_OBJS = tclXunixTest.$(OBJEXT)
#========================================================================
# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
# this package that need to be installed, if any.
#========================================================================
PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
#========================================================================
# This is a list of public header files to be installed, if any.
#========================================================================
PKG_HEADERS = @PKG_HEADERS@
#========================================================================
# Add additional lines to handle any additional AC_SUBST cases that
# have been added to the configure script.
#========================================================================
HELP_DIR = @HELP_DIR@
HELP_DIR_NATIVE = `@CYGPATH@ ${HELP_DIR}`
#========================================================================
# Nothing of the variables below this line need to be changed. Please
# check the TARGETS section below to make sure the make targets are
# correct.
#========================================================================
#========================================================================
# "PKG_LIB_FILE" refers to the library (dynamic or static as per
# configuration options) composed of the named objects.
#========================================================================
PKG_LIB_FILE = @PKG_LIB_FILE@
lib_BINARIES = $(PKG_LIB_FILE)
BINARIES = $(lib_BINARIES)
SHELL = @SHELL@
srcdir = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
datadir = @datadir@
mandir = @mandir@
includedir = @includedir@
DESTDIR =
PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION)
pkgdatadir = $(datadir)/$(PKG_DIR)
pkglibdir = $(libdir)/$(PKG_DIR)
pkgincludedir = $(includedir)/$(PKG_DIR)
top_builddir = .
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
CC = @CC@
CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
CFLAGS_WARNING = @CFLAGS_WARNING@
CLEANFILES = @CLEANFILES@
EXEEXT = @EXEEXT@
LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
MAKE_LIB = @MAKE_LIB@
MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
MAKE_STUB_LIB = @MAKE_STUB_LIB@
OBJEXT = @OBJEXT@
RANLIB = @RANLIB@
RANLIB_STUB = @RANLIB_STUB@
SHLIB_CFLAGS = @SHLIB_CFLAGS@
SHLIB_LD = @SHLIB_LD@
SHLIB_LD_LIBS = @SHLIB_LD_LIBS@
STLIB_LD = @STLIB_LD@
TCL_DEFS = @TCL_DEFS@
TCL_BIN_DIR = @TCL_BIN_DIR@
TCL_SRC_DIR = @TCL_SRC_DIR@
# This is necessary for packages that use private Tcl headers
TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@
# Not used, but retained for reference of what libs Tcl required
TCL_LIBS = @TCL_LIBS@
#========================================================================
# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
# package without installing. The other environment variables allow us
# to test against an uninstalled Tcl. Add special env vars that you
# require for testing here (like TCLX_LIBRARY).
#========================================================================
EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR)
TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
TCLX_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
TCLX_HELP_DIR="$(HELP_DIR_NATIVE)" \
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
PATH="$(EXTRA_PATH):$(PATH)" \
TCLLIBPATH="$(top_builddir)"
TCLSH_PROG = @TCLSH_PROG@
TCLSH = $(TCLSH_ENV) $(TCLSH_PROG)
SHARED_BUILD = @SHARED_BUILD@
TCLX_TOOLS_SRC_DIR = `@CYGPATH@ $(srcdir)/unix/tools`
TCLX_DOC_DIR = `@CYGPATH@ $(srcdir)/doc`
TCLX_INSTCOPY = ${TCLSH} ${TCLX_TOOLS_SRC_DIR}/instcopy.tcl
TCLX_HELP_INST_DIR = `@CYGPATH@ $(DESTDIR)$(pkglibdir)/help`
INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@
PKG_CFLAGS = @PKG_CFLAGS@
DEFS = @DEFS@ $(PKG_CFLAGS)
CONFIG_CLEAN_FILES = Makefile
CPPFLAGS = @CPPFLAGS@
LIBS = @PKG_LIBS@ @LIBS@
AR = @AR@
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
#========================================================================
# Start of user-definable TARGETS section
#========================================================================
#========================================================================
# TEA TARGETS. Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries. Modify these targets so that they install
# the various pieces of your package. The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================
all: binaries libraries doc
#========================================================================
# The binaries target builds executable programs, Windows .dll's, unix
# shared/static libraries, and any other platform-dependent files.
# The list of targets to build for "binaries:" is specified at the top
# of the Makefile, in the "BINARIES" variable.
#========================================================================
binaries: $(BINARIES) pkgIndex.tcl
libraries:
doc: @BUILDHELP@
install: all install-binaries install-libraries install-doc
install-binaries: binaries install-lib-binaries install-bin-binaries
#========================================================================
# This rule installs platform-independent files, such as header files.
#========================================================================
install-libraries: libraries
@mkdir -p $(DESTDIR)$(includedir)
@echo "Installing header files in $(DESTDIR)$(includedir)"
@list='$(PKG_HEADERS)'; for i in $$list; do \
echo "Installing $(srcdir)/$$i" ; \
$(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
done;
#========================================================================
# Install documentation. Unix manpages should go in the $(mandir)
# directory.
#========================================================================
install-doc: doc install-help
@mkdir -p $(DESTDIR)$(mandir)/mann
@echo "Installing documentation in $(DESTDIR)$(mandir)"
@list='$(srcdir)/doc/*.n'; for i in $$list; do \
echo "Installing $$i"; \
rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
$(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
done
test: binaries libraries
$(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
shell: binaries libraries
@$(TCLSH) $(SCRIPT)
GDB = gdb
gdb:
$(TCLSH_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
#VALGRINDFLAGS=--logfile-fd=9
#TESTFLAGS=9> valgrind.log
valgrindtest: binaries libraries
$(TCLSH_ENV) valgrind --num-callers=12 --leak-resolution=high -v --leak-check=yes --show-reachable=yes $(VALGRINDFLAGS) $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
valgrind: binaries libraries
$(TCLSH_ENV) valgrind --num-callers=12 --leak-resolution=high -v --leak-check=yes --show-reachable=yes $(VALGRINDFLAGS) $(TCLSH_PROG) $(SCRIPT)
depend:
#========================================================================
# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above. That will ensure that this target is built when you
# run "make binaries".
#
# The $(PKG_OBJECTS) objects are created and linked into the final
# library. In most cases these object files will correspond to the
# source files above.
#========================================================================
$(PKG_LIB_FILE): $(PKG_OBJECTS)
-rm -f $(PKG_LIB_FILE)
${MAKE_LIB}
$(RANLIB) $(PKG_LIB_FILE)
pkgIndex.tcl:
(echo 'package ifneeded Tclx $(PACKAGE_VERSION) \
[list load [file join $$dir $(PKG_LIB_FILE)] Tclx]'\
) > pkgIndex.tcl
#========================================================================
# We need to enumerate the list of .c to .o lines here.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension. If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# sample.$(OBJEXT): $(srcdir)/generic/sample.c
# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the
# makefile to look into these paths when resolving .c to .obj
# dependencies.
#========================================================================
VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/compat
.c.@OBJEXT@:
$(COMPILE) -c `@CYGPATH@ $<` -o $@
#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================
#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
COMPRESS = tar jcvf $(PKG_DIR).tar.bz2 $(PKG_DIR)
DIST_ROOT = /tmp/dist
DIST_DIR = $(DIST_ROOT)/$(PKG_DIR)
dist-clean:
rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
dist: dist-clean
mkdir -p $(DIST_DIR)
cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
$(DIST_DIR)/
chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
mkdir $(DIST_DIR)/tclconfig
cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
$(DIST_DIR)/tclconfig/
chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
chmod +x $(DIST_DIR)/tclconfig/install-sh
list='doc generic library tests tests/compat unix unix/tools win'; \
for p in $$list; do \
if test -d $(srcdir)/$$p ; then \
mkdir $(DIST_DIR)/$$p; \
cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
fi; \
done
cp -p $(srcdir)/unix/INSTALL $(DIST_DIR)/unix/;
cp -p $(srcdir)/unix/tools/*manpages $(DIST_DIR)/unix/tools/;
(cd $(DIST_ROOT); $(COMPRESS);)
#========================================================================
# End of user-definable section
#========================================================================
#========================================================================
# Don't modify the file to clean here. Instead, set the "CLEANFILES"
# variable in configure.in
#========================================================================
clean: helpclean
-test -z "$(BINARIES)" || rm -f $(BINARIES)
-rm -f *.$(OBJEXT) core *.core
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
helpclean:
-rm -rf $(HELP_DIR)
distclean: clean
-rm -f *.tab.c
-rm -f $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log config.status
#========================================================================
# Install binary object libraries. On Windows this includes both .dll and
# .lib files. Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.
# In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh shell)
#
# You should not have to modify this target.
#========================================================================
install-lib-binaries:
@mkdir -p $(DESTDIR)$(pkglibdir)
@list='$(lib_BINARIES)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
if test "x$$stub" = "xstub"; then \
echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
else \
echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
fi; \
ext=`echo $$p|sed -e "s/.*\.//"`; \
if test "x$$ext" = "xdll"; then \
lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
if test -f $$lib; then \
echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
$(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
fi; \
fi; \
fi; \
done
@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
if test -f $(srcdir)/$$p; then \
destp=`basename $$p`; \
echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
$(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
fi; \
done
@if test "x$(SHARED_BUILD)" = "x1"; then \
echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
$(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
fi
#========================================================================
# Install binary executables (e.g. .exe files and dependent .dll files)
# This is for files that must go in the bin directory (located next to
# wish and tclsh), like dependent .dll files on Windows.
#
# You should not have to modify this target, except to define bin_BINARIES
# above if necessary.
#========================================================================
install-bin-binaries:
@mkdir -p $(DESTDIR)$(bindir)
@list='$(bin_BINARIES)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
fi; \
done
.SUFFIXES: .c .$(OBJEXT)
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
uninstall-binaries:
list='$(lib_BINARIES)'; for p in $$list; do \
rm -f $(DESTDIR)$(pkglibdir)/$$p; \
done
list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
p=`basename $$p`; \
rm -f $(DESTDIR)$(pkglibdir)/$$p; \
done
list='$(bin_BINARIES)'; for p in $$list; do \
rm -f $(DESTDIR)$(bindir)/$$p; \
done
.PHONY: all binaries clean depend distclean doc install libraries test
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#------------------------------------------------------------------------------
# Build help for Tcl & TclX. These files are normally part of the
# distribution and not rebuilt by users.
#
buildhelp: help
help: $(BINARIES)
if test ! -d "${HELP_DIR}" ; then \
mkdir -p "${HELP_DIR}" ; \
${TCLSH} ${TCLX_TOOLS_SRC_DIR}/bldmanhelp.tcl \
`@CYGPATH@ ${TCL_SRC_DIR}/doc` \
${TCLX_TOOLS_SRC_DIR}/tclmanpages ${HELP_DIR_NATIVE} Tcl.brf; \
${TCLSH} ${TCLX_TOOLS_SRC_DIR}/runbuildhelp.tcl \
${HELP_DIR_NATIVE} TclX.brf ${TCLX_DOC_DIR}/TclX.n; \
fi
install-help:
@if test -d "${HELP_DIR}" ; then \
echo "Installing TclX help files in ${TCLX_HELP_INST_DIR}"; \
mkdir -p ${TCLX_HELP_INST_DIR}; \
${TCLX_INSTCOPY} ${HELP_DIR_NATIVE} ${TCLX_HELP_INST_DIR}; \
fi
syntax highlighted by Code2HTML, v. 0.9.1