# New ports collection makefile for: quagga
# Date created: 3 September 2003
# Whom: Bruce M Simpson <bms@FreeBSD.org>
#
# $FreeBSD: ports/net/quagga/Makefile,v 1.65 2007/11/12 20:53:29 sem Exp $
#
PORTNAME= quagga
PORTVERSION= 0.99.9
PORTREVISION= 5
CATEGORIES= net ipv6
MASTER_SITES= http://quagga.net/download/ \
http://www.ru.quagga.net/download/ \
http://www.de.quagga.net/download/ \
http://www.us.quagga.net/download/ \
http://www.us2.quagga.net/download/ \
http://www.au.quagga.net/download/
PATCH_SITES= http://quagga.net/
MAINTAINER= boris@tagnet.ru
COMMENT= Free RIPv1, RIPv2, OSPFv2, BGP4, IS-IS route software
CONFLICTS= openbgpd-[0-9]* zebra-0*
USE_AUTOTOOLS= libtool:15
CONFIGURE_TARGET= --build=${MACHINE_ARCH}-portbld-freebsd${OSREL}
USE_GMAKE= yes
USE_LDCONFIG= yes
USE_PERL5_BUILD= yes
MAN1= vtysh.1
MAN8= bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8
INFO= quagga
OPTIONS= ISISD "Enable experimental ISIS daemon" off \
PAM "PAM authentication for vtysh" off \
OSPF_NSSA "NSSA support (RFC1587)" off \
OSPF_OPAQUE_LSA "OSPF Opaque-LSA support (RFC2370)" off \
RTADV "IPv6 Router Advertisements" off \
SNMP "SNMP support" off \
TCPSOCKETS "Use TCP/IP sockets for protocol daemons" off \
TCPMD5 "Use experimental MD5 patch for BGP" off \
DLMALLOC "Use dlmalloc (makes bgpd much faster)" off
.include <bsd.port.pre.mk>
CONFIGURE_ARGS+=--includedir=${PREFIX}/include --enable-exampledir=${PREFIX}/share/examples/quagga --enable-pidfile-mask=0644
CONFIGURE_ENV+= CFLAGS="${CFLAGS} -I${LOCALBASE}/include" \
LDFLAGS="${LDFLAGS} -L${LOCALBASE}/lib" \
LIBTOOL=${LIBTOOL} LIBTOOLIZE=${LIBTOOLIZE} \
LIBTOOL_VERSION=${LIBTOOL_VERSION}
.if !defined(ENABLE_USER)
ENABLE_USER=quagga
.endif
.if !defined(ENABLE_GROUP)
ENABLE_GROUP=quagga
.endif
CONFIGURE_ARGS+=--enable-user=${ENABLE_USER}
CONFIGURE_ARGS+=--enable-group=${ENABLE_GROUP}
.if !defined(SYSCONF_DIR)
SYSCONF_DIR=${PREFIX}/etc/quagga
.endif
.if !defined(LOCALSTATE_DIR)
LOCALSTATE_DIR=/var/run/quagga
.endif
CONFIGURE_ARGS+=--sysconfdir=${SYSCONF_DIR}
CONFIGURE_ARGS+=--localstatedir=${LOCALSTATE_DIR}
.if defined(ENABLE_VTY_GROUP)
CONFIGURE_ARGS+=--enable-vty-group=${ENABLE_VTY_GROUP}
.endif
CONFIGURE_ARGS+=--enable-vtysh
SCRIPTS_ENV= PREFIX=${PREFIX} PKG_PREFIX=${PREFIX} \
SYSCONF_DIR=${SYSCONF_DIR} SYSSTATE_DIR=${SYSSTATE_DIR} \
ENABLE_USER=${ENABLE_USER} ENABLE_GROUP=${ENABLE_GROUP}
.if defined(WITH_ISISD)
CONFIGURE_ARGS+=--enable-isisd
PLIST_SUB+= ISISD=""
.else
PLIST_SUB+= ISISD="@comment "
.endif
MAN8+= isisd.8
.if defined(WITH_PAM)
CONFIGURE_ARGS+=--with-libpam
.endif
.if defined(WITH_OSPFNSSA)
CONFIGURE_ARGS+=--enable-nssa
.endif
.if defined(WITH_OSPF_OPAQUE_LSA)
CONFIGURE_ARGS+=--enable-opaque-lsa
PLIST_SUB+= OSPFAPI=""
.else
PLIST_SUB+= OSPFAPI="@comment "
.endif
.if defined(WITH_RTADV)
CONFIGURE_ARGS+=--enable-rtadv
.endif
.if defined(WITH_SNMP)
CONFIGURE_ARGS+=--enable-snmp
LIB_DEPENDS+=netsnmp.10:${PORTSDIR}/net-mgmt/net-snmp
.endif
.if defined(WITH_TCPMD5)
EXTRA_PATCHES+=${PATCHDIR}/extra-tcpmd5-patch-bgpd-bgp_network.c ${PATCHDIR}/extra-tcpmd5-patch-bgpd-bgp_vty.c ${PATCHDIR}/extra-tcpmd5-patch-bgpd-bgpd.c ${PATCHDIR}/extra-tcpmd5-patch-bgpd-bgpd.h ${PATCHDIR}/extra-tcpmd5-patch-lib-sockopt.c ${PATCHDIR}/extra-tcpmd5-patch-lib-sockopt.h ${PATCHDIR}/extra-tcpmd5-patch-vtysh-extract.pl.in
CFLAGS+= -DQUAGGA_TCP_MD5SIG
.endif
.if defined(WITH_DLMALLOC)
LIB_DEPENDS+=dlmalloc.2:${PORTSDIR}/devel/libdlmalloc
LDFLAGS+=-ldlmalloc
SUB_LIST= RCLDCONFIG=ldconfig
.else
SUB_LIST= RCLDCONFIG=
.endif
.if ${OSVERSION} < 600000
BUILD_DEPENDS+=${LOCALBASE}/bin/makeinfo:${PORTSDIR}/print/texinfo
CONFIGURE_ENV+=MAKEINFO=${LOCALBASE}/bin/makeinfo
.endif
USE_RC_SUBR= watchquagga.sh
.if ${OSVERSION} >= 600101
USE_RC_SUBR+= quagga.sh
.else
USE_RCORDER= quagga.sh
.endif
SUB_LIST+= LOCALSTATE_DIR=${LOCALSTATE_DIR} \
SYSCONF_DIR=${SYSCONF_DIR}
PLIST_SUB+= LOCALSTATE_DIR=${LOCALSTATE_DIR} \
SYSCONF_DIR=${SYSCONF_DIR} \
ENABLE_USER=${ENABLE_USER} \
ENABLE_GROUP=${ENABLE_GROUP}
pre-everything::
@${ECHO} "============================================================="
@${ECHO}
@${ECHO} "You can build ${PORTNAME} with the following options:"
@${ECHO}
@${ECHO} "ENABLE_USER Specify user to run Quagga suite as"
@${ECHO} "ENABLE_GROUP Specify group to run Quagga suite as"
@${ECHO} "ENABLE_VTY_GROUP Specify group for vty socket ownership"
@${ECHO} "SYSCONF_DIR Specify directory for Quagga configuration files"
@${ECHO} "LOCALSTATE_DIR Specify directory for Quagga runtime files"
@${ECHO}
@${ECHO} "The following options may be configured interactively:"
@${ECHO} " WITH_PAM PAM authentication for vtysh"
@${ECHO} " WITH_OSPF_NSSA NSSA support (RFC1587)"
@${ECHO} " WITH_OSPF_OPAQUE_LSA OSPF Opaque-LSA with OSPFAPI support (RFC2370)"
@${ECHO} " WITH_RTADV IPv6 Router Advertisements"
@${ECHO} " WITH_SNMP SNMP support"
@${ECHO} " WITH_TCPSOCKETS Use TCP/IP sockets for protocol daemons"
@${ECHO} " WITH_TCPMD5 Use experimental MD5 patch for BGP"
@${ECHO} " WITH_DLMALLOC Use dlmalloc (makes bgpd much faster)"
post-install:
@${SETENV} ${SCRIPTS_ENV} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@${ECHO} "===> installing ${PORTNAME} startup file..."
@${ECHO} "Add the following lines to /etc/rc.conf to enable quagga:"
@${ECHO} ""
@${ECHO} "defaultrouter=\"NO\""
@${ECHO} "quagga_enable=\"YES\""
@${ECHO} ""
@${ECHO} "Also, you may wish to set the following options:"
@${ECHO} "quagga_daemons=\"zebra bgpd etc...\""
@${ECHO} "quagga_flags=\"....\""
@${ECHO} "quagga_extralibs_path=\"/path1 /path2\""
@${ECHO} "router_enable=\"NO\""
@${ECHO} "watchquagga_enable=\"YES\""
@${ECHO} "watchquagga_flags=\"...\""
@${ECHO} ""
@${ECHO} "Note!!! Since 0.96.4_5 port uses new id for quagga user and group."
@${ECHO} " So, You need to manually chown files:"
@${ECHO} " in ${SYSCONF_DIR}"
@${ECHO} " and ${LOCALSTATE_DIR}"
@${ECHO} " if You had never do this before. Or run"
@${ECHO} " make changeuser"
@${ECHO} ""
.if defined(WITH_TCPMD5) && !defined(WITHOUT_TCPMD5)
@${ECHO} "Note!!! To use MD5 passwords on BGP sessions, your kernel must"
@${ECHO} "be built with the following options:"
@${ECHO} " options TCP_SIGNATURE"
@${ECHO} " options FAST_IPSEC"
@${ECHO} " device crypto"
@${ECHO} " device cryptodev"
@${ECHO} ""
.endif
.if !defined(BATCH)
post-clean:
@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
.endif
changeuser:
# Recover from the problem that earlier versions of this port created the
# quagga pseudo-user with an id of 90 which is used by FireBird database
# engine. The port now uses id 101:101.
# NOTE:
# This target assumes that ENABLE_GROUP is the primary group of ENABLE_USER. If you
# have a different setup, do not run this target!
@if [ `${ID} -u` -ne 0 ]; \
then ${ECHO_CMD} "Sorry, you must be root to use this target."; exit 1; fi; \
current_uid=`id -u ${ENABLE_USER}`; \
current_gid=`pw groupshow ${ENABLE_GROUP}|cut -f 3 -d :`; \
${ECHO_CMD} "I will remove this user:"; \
${ID} -P $${current_uid}; \
${ECHO_CMD} "and this group:"; \
pw groupshow ${ENABLE_GROUP}; \
${ECHO_CMD} "I will then re-create them with a user and group id of 101."; \
${ECHO_CMD} "Then all files and directories under ${PREFIX} and /var that"; \
${ECHO_CMD} "are owned by uid $${current_uid} will be chown(1)'ed."; \
${ECHO_CMD} "After that, all files and directories that were accessible"; \
${ECHO_CMD} "by group $${current_gid} will chgrp(1)'ed respectively."; \
${ECHO_CMD} "Note that this assumes group '${ENABLE_GROUP}' to be the primary"; \
${ECHO_CMD} "group of user '${ENABLE_USER}'. If you have a different setup"; \
${ECHO_CMD} "please abort this target now. Also don't forget to write your"; \
${ECHO_CMD} "Quagga configs right now!"; \
read -p "Press RETURN to continue or CTRL-C to abort:" dummy ; \
${ECHO_CMD} "OK, here we go:"; \
${ECHO_CMD} "deleting user $${current_uid} and his primary group..."; \
pw userdel -u $${current_uid}; \
${ECHO_CMD} "adding user ${ENABLE_USER} with id 101..."; \
pw groupadd -n ${ENABLE_USER} -g 101; \
pw useradd -n ${ENABLE_GROUP} -u 101 -c "quagga route daemon pseudo-user" \
-d ${SYSCONF_DIR} -s /sbin/nologin -h - ; \
${ECHO_CMD} "chown(1)'ing everything under ${PREFIX} from $${current_uid} to 101..."; \
${FIND} -H ${PREFIX} -user $${current_uid} -exec ${CHOWN} 101 {} \; ; \
${ECHO_CMD} "chgrp(1)'ing everything under ${PREFIX} from $${current_gid} to 100..."; \
${FIND} -H ${PREFIX} -group $${current_gid} -exec ${CHOWN} :101 {} \; ; \
${ECHO_CMD} "chown(1)'ing everything under /var from $${current_uid} to 101..."; \
${FIND} -H /var -user $${current_uid} -exec ${CHOWN} 101 {} \; ; \
${ECHO_CMD} "chgrp(1)'ing everything under /var from $${current_gid} to 101..."; \
${FIND} -H /var -group $${current_gid} -exec ${CHOWN} :101 {} \; ; \
${ECHO_CMD} "Finished. You must stop and then start Quagga now."
.include <bsd.port.post.mk>
syntax highlighted by Code2HTML, v. 0.9.1